Linksys RT042 User Guide - Page 19
Basic Setup Tab - Network, User Bandwidth
UPC - 745883563821
View all Linksys RT042 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Broadband Router User Bandwidth This is a list of all users on your network, displaying how they're connected and allowing you to set the amount of bandwidth they are allowed and to delete them as users on your network. The headings for this list are: User Name: Shows the name of this user on your network. IP: Shows the IP Address of this user's PC. Interface: Shows the Internet port the user is accessing. You can also configure the user to go through the other Internet port by selecting the interface from the drop-down menu when dual Internet ports are used. Min.Rate (Kbit/Sec): Enter the minimum allowable bandwidth for this user. The default setting is 0. Max.Rate (Kbit/Sec): Enter the maximum allowable bandwidth for this user. The default setting is 512. Delete: Click the trashcan icon if you wish to delete this user from the user bandwidth or from Internet access. ISP Bandwidth This section allows you to set the maximum upstream or downstream bandwidth per Internet port, maximizing your network's performance. This information can be obtained from your ISP. Click the Save Settings button to save the network settings or click the Cancel Changes button to undo your changes. Basic Setup Tab - Network The Basic Setup tab contains all of the router's basic setup functions.The first screen that appears, the Network screen, includes basic settings for your network. The router can be used in most network settings without changing any of the default values. Some users may need to enter additional information in order to connect to the Internet through an ISP (Internet Service Provider) or broadband (DSL, cable modem) carrier. If you need help to configuring the router, click the Setup Wizard button. A walk-through of the Wizard is provided in "Appendix E: The Setup Wizard". Host Name & Domain Name: Enter a host and domain name for the Router. Some ISPs may require these names as identification, and these settings can be obtained from your ISP. In most cases, leaving these fields blank will work. Chapter 5: Setting Up and Configuring the Broadband Router Basic Setup Tab - Network Figure 5-5: System Summary Tab Figure 5-6: Basic Setup Tab - Network 13