Linksys SPA922 Cisco Small Business IP Phone SPA9XX User Guide - Page 14
Before You Begin, Connecting the Handset
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing Your Phone Before You Begin 2 Before You Begin Before you install and connect your phone, verify with your System Administrator (if applicable) that the network is ready for the phone, read the safety notices, and make sure you have all the phone parts and documentation available. NOTE: The RJ-11 port marked "AUX" is reserved for connection with the SPA932 Attendant Console that works with the SPA962. It is not for use as a telephone line port. CAUTION: Do not plug a telephone line cord ! into the port marked "AUX." Connecting the Handset STEP 1 Find the end of the coiled phone cord that has the longer straightened end. Plug that end into the back of the phone base in the slot marked with a phone symbol. This port is labeled #5 on the Cisco SPA IP Phone Connections graphic. STEP 2 Plug in the short straightened end of the handset cord into the jack at the bottom of the handset (not shown). Cisco Small Business IP Phone SPA9XX User Guide 13