MSI 845GEM-L User Guide - Page 24
Installing DDR Modules, DDR Module Combination, Memory, Module, Total Memory
View all MSI 845GEM-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
845 GM/GLM/GEM/PEM/GVM series M-ATX Mainboard DDR Module Combination Install at least one DIMM module on the slot. Memory modules can be installed on the slots in any order. You can install either single- or doublesided modules to meet your own needs. Memory modules can be installed in any combination as follows: Slot DIMM 1 (Bank 0 & 1) DIMM 2 (Bank 2 & 3) Memory Module S/D S/D Maximum System Memory Supported Total Memory 64MB~1GB 64MB~1GB 64MB~2GB S: Single Side D: Double Side Installing DDR Modules 1. The DDR DIMM has only one notch on the center of module. The module will only fit in the right orientation. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the socket. MSI Reminds You... You can barely see the golden finger if the module is properly inserted in the socket. 3. The plastic clip at each side of the DIMM slot will automatically close. Volt Notch 2-8