MSI 845GEM-L User Guide - Page 58
Serial Port A/B, Serial Port B Mode, RxD, TxD Active, IR Transmission Delay, IR Duplex Mode
View all MSI 845GEM-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
BIOS Setup Serial Port A/B These items specify the base I/O port addresses of the onboard Serial Port A (COM A)/Serial Port B (COM B). Selecting Auto allows AWARD to automatically determine the correct base I/O port address. Settings: Auto, 3F8/ IRQ4, 2F8/IRQ3, 3E8/COM4, 2E8/COM3 and Disabled. Serial Port B Mode This item sets the operation mode for Serial Port B. Settings: Normal, 1.6 uS, 3/16 Baud and ASKIR. Normal: RS-232C Serial Port IrDA: IrDA-compliant Serial Infrared Port ASKIR: Amplitude Shift Keyed Infrared Port RxD, TxD Active This setting controls the receiving and transmitting speed of the IR peripheral in use. Setting options: Hi,Hi, Hi,Lo, Lo,Hi, Lo,Lo. IR Transmission Delay This setting determines whether the IR transmission rate will be delayed while converting to receiving mode. Setting options: Disabled, Enabled. IR Duplex Mode This setting controls the operating mode of IR transmission/reception. Setting options: Full, Half. Under Full Duplex mode, synchronous, bidirectional transmission/reception is allowed. Under Half Duplex mode, only asynchronous, bi-directional transmission/reception is allowed. IR Pin Select Please consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals. Setting options: RxD2,TxD2, IRRx2Tx2. Parallel Port This field specifies the base I/O port address of the onboard parallel port. Selecting Auto allows AMIBIOS to automatically determine the correct base I/O port address. Settings: Auto, 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled. 3-17