Magnavox 20MF500T User Manual - Page 8

ANTENNA CONNECTION Acombination antenna receives normal broadcast channels (VHF 2-13 and UHF 14-69). Your connection is easy because there is only one 75 (ohm) antenna jack on the back of your TV, and that's where the antenna goes. 1 If your antenna has a round cable (75 ohm) on the end, then you're ready to Outdoor or Indoor Antenna (Combination VHF/UHF) connect it to the LCD TV. If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter(not supplied). 2 Connect the antenna (or adapter) to one end of the supplied L-Adapter as shown, and connect the other end of the L-Adapter to the TV jack on the side of the LCD TV. � Twin-lead wire to 300-75� adapter Rear Jack panel of Television � OR Antenna with 75 � cable L-Adapter BASIC CABLE TV CONNECTION Y our Cable TV signal into your home may be a single, 75(•ohm) cable. If so, this connection is very simple. Follow the step below to connect your Cable TV signal to your new LCD TV. 1 Connect the Cable TV signal to one end of the supplied L-Adapter as shown, and connect the other end of the adapter to the TV jack on the LCD TV. Rear Jack panel of Television The Cable TV signal from Cable Company (75 � coaxial cable) � L-Adapter 8