Magnavox 32MV319R/F7 Owners Manual_EN - Page 11

3 Connections and setup Refer to your TV's Quick Start Guide or other provided documentation to for model-specific information about attaching the base or a wall mount and making connections to AC power and to your other audio/video devices. The following information applies to all Roku TV models. Connecting an antenna, cable, or satellite box If you are using an antenna, CATV cable without a set-top box, or a cable or satellite box that has only an antenna output, connect a 75-ohm coaxial cable (not provided) from the device to the ANT/ CABLE input on the TV. Tip(s) ● If you are using an antenna with a 300 ohm twin-lead cable, you need to use a 300-to-75 ohm adapter (not provided) to adapt the twin-lead cable to a connection that is compatible with the TV's antenna input. ● If you receive your TV stations through a set top box from a cable or satellite TV provider, connect it to the TV using the best connection method available. From most to least desirable: - HDMI® input - Digital HD and SD video - AV input - analog SD video - Antenna input - analog SD video using NTSC Connecting external equipment with a composite AV video cable If the best connection available on your device is AV or composite video output, connect it to the TV using a composite AV cable (not provided). Composite AV cables typically have three RCA-type plugs on each end, color coded as follows: - Yellow- Video - Red- Audio, right channel - White or black- Audio, left channel Connect each plug to the corresponding connector on the device and on the TV. Note(s) ● Select models have an AV Input that looks like a headphone jack. Use the breakout cable (included) to adapt this input to the three RCA-type plugs on your composite cable. 11 .English Connecting external equipment with an HDMI® cable If possible, connect your devices using HDMI® cables (not provided). They help to provide the best video quality and also carry audio signals, so that only one cable is needed. For better picture quality, we recommend that you use cables designated as High Speed HDMI® Cables. Tip(s) ● You might need to configure the device to send its signal through its HDMI® connector The connector labeled HDMI IN (ARC) has the additional ability to use the audio return channel to send digital audio to a receiver or sound bar, as explained in Connecting an AV receiver or digital sound bar L p. 11 Connecting an AV receiver or digital sound bar You can enjoy Dolby Audio™ multichannel sound from your TV if you connect a digital amplifier or sound bar (not provided) in either of two ways: ● Digital optical audio out (S/PDIF) - Connect a TOSLINK optical cable (not provided) from the TV to the Optical input on your receiver or sound bar. ● HDMI® ARC - Connect an HDMI® cable (not provided) from the HDMI (ARC) connector to the HDMI® input on your receiver or sound bar. This connection uses the Audio Return Channel (ARC) feature of the HDMI® specification to output sound from the TV to a compatible device. To use this feature, you must configure the TV to enable HDMI® ARC, as explained in Enable HDMI®ARC L p. 55.