Magnavox 32MV319R/F7 Owners Manual_EN - Page 25

7 Using your TV This section provides information on using the day-to-day features of your TV. Status indicator Your TV has a single status indicator. It goes on and off and blinks in different ways depending on the status of the TV, as shown in the following table: TV condition Status indicator Meaning On (screen is active) Screen is Off communicating that TV is on. Screensaver (screen is active) Screen is Off communicating that TV is on. Off (no power) Off TV is not connected to power. Off (standby) TV is connected to On power and is ready to use. Starting up from off state Slow pulsing blink until startup completes TV is doing something. On (receiving update from USB) Slow pulsing blink until update completes TV is doing something. Remote command received Dims on/off once TV has received your command. Network connection lost Two short blinks, pause, repeat TV was connected and paired with a Roku account and now has no network connection. Powering down to standby mode Slow pulsing blink until the TV reaches standby. TV is doing something. 25 .English Standby mode energy savings When you turn off your TV, it remains in a higher power mode for a few minutes, after which it goes into a very low power standby mode. If you turn on the TV again before it has entered the very low power mode, it turns on immediately. After the TV goes into the lower power standby mode, it takes a few seconds longer to start up. Only in connected mode on TVs that do not have an Energy Star® rating, you can optionally enable Fast TV start. When this option is enabled, your TV starts up almost immediately regardless of how long it has been turned off, but uses somewhat more power in standby mode. For more information, see Fast TV start Opting in to Smart TV experience (U.S. only) Only in connected mode in the United States, the first time you select Antenna TV, an HDMI input, or AV input, your TV offers to enable the Smart TV experience. If you decide to enable it at this time, you're all set to enjoy its recommendations and features. The Smart TV experience uses automatic content recognition (ACR) and other technology to collect information about what you watch through your Antenna TV, and on devices like media players and cable boxes connected to the HDMI or AV inputs. Opting in means that you give permission to analyze the programs you watch for the purpose of making recommendations, as well showing ads that are more relevant to you. If you decide not to enable the Smart TV experience at this first opportunity, you can enable it later. Or, if you decide you'd rather not use the feature, you can disable it, but be aware that previously collected information is retained and not deleted. Disable Smart TV experience If you decide you want to disable Smart TV experience, follow these steps: 1 From the Home screen, go to Settings > Privacy > Smart TV experience. 2 Navigate to the right to highlight Use info from TV inputs. 3 Press OK on the remote to clear the check box.