Magnavox AJ3080 User manual, Danish - Page 7
Troubleshooting
View all Magnavox AJ3080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English CAJ3080/00 page 7 TROUBLESHOOTING - If a fault occurs, first check the points listed below before taking the set for repair. - If you are unable to remedy a problem by following the hints below, consult your dealer or service centre. WARNING: under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. PROBLEM - POSSIBLE CAUSE • REMEDY No sound - Volume not adjusted. • Adjust the volume. MW (LW) broadcast cannot be received properly - Weak radio signal. • Rotate the set for better reception and make sure the set is placed on a non-metallic surface. The alarm does not function - The alarm is not set • Set the alarm time and the alarm switch to BUZ or RAD. - Volume too low for radio. • Increase the volume. The slumber does not function - RADIO still in ON position. • Switch RADIO to OFF position. - Clock control in TIME SET or ALARM position. • Adjust clock control to RUN position. Continuous crackling and hiss noise during MW (LW) reception - Interference from other electrical equipment e.g. TV's, computers, fluorescent lamps. • Move the clock radio away from electrical equipment. Intermittent crackling sound during FM reception - Weak signal. • Adjust the pigtail aerial. ENVIRONMENTAL INFORMATION All unnecessary packaging material has been omitted. We have tried to make the packaging easy to separate into three mono-materials: cardboard (box), expandable polystyrene (buffer), polyethylene (bags). Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment. The model and production numbers are located on the bottom of the clock radio. This set complies with the radio interference requirements of the European Community. 7