Magnavox MDV443 User manual, English (US) - Page 12
Connecting to a TV only, TV has, COMPONENT VIDEO IN, Jacks
View all Magnavox MDV443 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 Hookups (cont'd) Back of TV (example only) Connecting to a TV only TV has COMPONENT VIDEO IN Jacks LEFT AUDIO IN RIGHT AUDIO IN VIDEO IN LEFT AUDIO IN RIGHT AUDIO IN COMPONENT VIDEO IN Y Cr/Pr Cb/Pb DVD Player AUDIO OUT L Y Cr COMPONENT DIGITAL AUDIO VIDEO OUT OUT PCM / BITSTREAM 1 COAXIAL R VIDEO OUT Cb S-VIDEO OUT 2 1 Connect the supplied red and white audio cables to the red and white AUDIO OUT jacks on the DVD Player and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors. The right jack is red; the left jack is white. 2 Connect component video cables (not supplied) to the COMPONENT VIDEO OUT jacks (Y Cr Cb) on the DVD Player and to the COMPONENT VIDEO IN jacks on the TV. The jacks on the Player are green, red, and blue. 3 Plug in the TV's power cord. Turn on the TV and set it to the Component Video In channel, which may be near channel 00. Go to your lowest TV channel (01 or 02) and change channels downward until you find the Component Video In channel. If you cannot find it, check your TV owner's manual. During Audio CD playback, you may check the status of Audio CDs on your TV screen. During DVD playback, you will watch the program on the TV. 4 Connect the DVD Player's power cord to a power outlet. Press the STANDBY-ON button to turn on the DVD Player. You should see the DVD logo on the TV screen. If you do not, check your connections and make sure the TV is on the correct Component Video In channel.