Magnavox NB500MG9 Owners Manual - Page 38

FUNCTION SETUP How to navigate through "HDMI Multi(LPCM)". 1 Use [K / L] to select your desired menu item then press [OK]. 2 Use [K / L] to select your setting items. • Press [RETURN] to go back to the previous screen. 3 Use [s / B] to select desired options. (Except for "Test Tone" and "Default".) For "Test Tone": Use [s / B] to select "Off", "Manual" or "Auto", then press [OK]. • The test tone will be output. If you select "Manual", use [K / L] to select desired speaker, then use [s / B] to adjust the volume. If you select "Auto", use [s / B] to adjust the volume of the speaker that outputs the test tone. • If you want to stop the test tone, press [RETURN]. For "Default": Press [OK] to reset to the default. 4 Press [SETUP] to exit. Menu Speaker Size Selects the desired speaker to set. Then change the setting appropriately by referring to the descriptions. Setting items Front Center Subwoofer Surround Surround Back Default Options Large* Small Large* Small On Large* Small Large* Small Channel Level Tests or sets the volume for each speakers. Test Tone: "Test Tone" is the test tone which can be output from the speakers so that you can adjust the volume for each speaker. Front Lch Center Subwoofer Front Rch Surround Rch Surround Back Rch Surround Back Lch Surround Lch Default Off* Manual Auto 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) 0 dB to -12 dB (0 dB*) Descriptions Large: For the large speakers with strong low frequency reproduction capabilities. Small: For the small speakers which do not provide strong bass sound. You cannot change the setting of "Subwoofer". If connected device is not compatible with subwoofer, "Subwoofer" will be displayed in gray. Select "Default", then press [OK] to reset "Speaker Size" setting to the default. Select "Off" to deactivate "Test Tone". Select "Manual", then press [OK] to manually set the volume for the desired speaker. Select "Auto", then press [OK] to automatically output the test tone from each speakers. If you have selected "Manual" in "Test Tone", select the desired speaker to set and adjust the volume for the selected speaker. If you select "Auto" in "Test Tone", test tone will automatically be output in order. Adjust the volume of the speaker that outputs the test tone. Select "Default", then press [OK] to reset "Channel Level" setting to the default. 38 EN