Makita EK6101 Operation Manual - Page 13

Technical data EK6100 EK6101 Displacement cu in (cm3) 3.7 (60.7) 3.7 (60.7) Bore in (mm) 1.85 (47) 1.85 (47) Stroke in (mm) 1.38 (35) 1.38 (35) Max. power / operating speed hp (kW)/1/min 4.4 (3.2) / 9.500 4.4 (3.2) / 9.500 Max. torque Nm 3.9 3.9 Idling speed 1/min 2.600 2.600 Clutch engagement speed 1/min 3.900 3.900 Engine speed limitation 1/min 9.850 ± 150 9.850 ± 150 Max. spindle speed 1/min 5.100 4.400 Sound pressure level at the operators ear dB(A) 100 100 Sound pressure level at the bystander's position (50 ft) dB(A) 79 80 Vibration acceleration ah,w per ANSI.175.4 - Tubular handle (rated speed) m/s2 7.9 7.3 - Rear handle (rated speed) m/s2 4.5 3.7 Carburetor (diaphragm carburetor) Type ZAMA Ignition system (with speed limitation) Type electronic Spark plug Type NGK BPMR 7A Electrode gap in (mm) .020 (0.5) .020 (0.5) Fuel consumption at max. load per ISO 8893 kg/h 1.42 1.42 Specific consumption at max. load per ISO 8893 g/kWh 430 430 Fuel tank capacity fl oz (l) 23.6 (0.7) 23.6 (0.7) Mixture ratio (fuel/two-stroke oil) - when using MAKITA Synthetic oil 50:1 50:1 - when using other synthetic oil (quality grade: JASO FC or ISO EGD) 50:1 50:1 Cutting disc for 80 m/sec. 1) in 12" / 0.8" / 0.2" 2) 14" / 0.8" / 0.2" 2) Cutting disc for 80 m/sec. 1) 3) in -- 14" / 1" / 0.2" 2) Arbor diameter in 0.8" 0.8" V‑belt no. 965 300 501 965 300 510 Overall weight (tanks empty, without cutting disc) lb (kg) 18.7 (8,5) 19.6 (8,9) 1) Circumference speed at max. engine speed. 2) Outside diameter / arbor hole / thickness. 3) Country-specific. 13