Marantz AV9000 AV9000 USER'S MANUAL - Page 11

ENGLISH FRONT PANEL FEATURES (SEE PAGE 3) q POWER switch and STANDBY indicator Press this button once to turn the unit on or off. In order to use the remote control unit to turn the unit on the power switch must be pressed once, and then the unit may be turned on or off via the remote. w PHONES jack for stereo headphones Conventional dynamic headphones can be plugged in here. Notes: When the headphones plug is inserted, the surround mode is switched automatically to STEREO and the sound from the speakers is muted. The surround mode returns to the previous mode as soon as the plug is removed from the jack. e INFRARED SENSOR window This window receives infrared signals from the remote control unit. r A/D (Analog/Digital) SELECTOR button In case that you select the input source which is linked with any digital input, if you desire to switch to analog input temporarily, you can switch by pressing A/D button. Note: This key is not effective for an input source which is not linked with any digital input. t AUTO MODE button Press this button to select the auto surround mode. y THX MODE button Press this button to select the THX surround mode. u SURROUND MODE SELECTOR ( up, down) buttons Press these buttons to set the desired surround mode in the following sequence. AUTO STEREO DOLBY DTS CINEMA DTS MUSIC MONO MATRIX HALL MOVIE THX CINEMA i BASS and TREBLE tone controls These controls are used to boost or cut high and low frequencies. TREBLE: Adjusts the tone of high-frequency sound. BASS: Adjusts the tone of low-frequency sound. Notes: These buttons are unavailable in THX CINEMA mode. The frequency is flat by pressing the up and down keys simultaneously. o DIGITAL AUDIO COPY button Press this button for digital dubbing to the CD-R recorder or MD deck. When this button is pressed, the digital source of the DIGITAL OUTPUT is switched in the following sequence. SOURCE DIG.1 DIG.2 DIG.3 DIG.4 OFF !0 TAPE COPY button Press this button for audio dubbing to the tape deck. When this button is pressed, the source of the TAPE OUT is switched in the following sequence. SOURCE TUNER CD CD-R/MD !1 VCR1 COPY button Press this button for video and audio dubbing to the VCR1 deck. When this button is pressed, the source of the VCR1 OUT is switched in the following sequence. SOURCE TV LD DVD DSS/VCR2 AUX !2 AUX input jacks These auxiliary video/audio input jacks accept the connection of a camcorder, portable VCR, etc. To make proper connections, refer to the owner's manuals of the auxiliary components. !3 VOLUME control knob Adjusts the overall sound level. Turning the control clockwise increases the sound level. !4 AUTO TUNING button When this button is pressed and the GYRO TUNING knob !6 is turned quickly, the frequency is scanned while turning the GYRO TUNING knob. The Auto scan function starts when the GYRO TUNING knob is stopped. !5 PRESET button Press this button to display the preset number. The preset number is changed by turning the GYRO TUNING knob. !6 GYRO TUNING knob Turn this knob to change the frequency or the preset number. The station name can be selected with this knob. !7 CLEAR button Press this button to cancel the station-memory setting mode or preset scan tuning. !8 MEMO (memory) button Press this button to enter the tuner preset memory numbers and station names. !9 INPUT SELECTOR knob When this knob is turned, the input signal is switched in the following sequence. TUNER CD TAPE CD-R/MD TV AUX DSS/VCR2 VCR DVD 6