Marantz SR4300 User Guide - Page 14
Remote Control Range
View all Marantz SR4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ENGLISH ⁄6 Numeric buttons 1 to 9 / Surround mode buttons Numeric buttons (1 - 9) These buttons are used to enter figures in the selection of a tuner preset station and station name preset or to set select a CD track number, etc. The functions of these buttons are dependent on the function button selected. Surround mode buttons (when AMP mode is selected) These buttons are also used to select the surround mode. Note: • The M-CH ST button is used to 6-stereo mode. ⁄7 0 / A/D button 0 button This button is used to enter the number "0" A/D button (when AMP mode is selected) This is used to switch between the analog and digital inputs. ⁄8 MENU button and MENU OFF button MENU button is used to enter the menu functions. Use the menu functions to setup SR4300. MENU OFF button is used to return original display from menu functions. ⁄9 Cursor buttons ( , , , , OK) Use these button when operating the SETUP MENU functions. : Moves the cursor left : Moves the cursor right : Moves the cursor up : Moves the cursor down OK : Enters to the SETUP MENU or Confirms the setting ¤0 MAIN VOLUME (Up) / (Down) buttons Adjusts the overall sound level. The front, surround, center and subwoofer channel volumes controlled by these buttons simultaneously. ¤1 CONTROL buttons These buttons are used when operating the CD player, TAPE deck, etc. The function of these buttons are dependent on the function button selected. ¤2 ATT (attenuate) button When the input signal is too high and the voice distorts even by throttling the SR4300 VOLUME control, turn on this function. "ATT" is indicated when this function is activated. The input level is reduced. Attenuation is invalid for use with the output signal of "REC OUT". REMOTE CONTROL RANGE The distance between the transmitter of the remote control unit and the IR SENSOR of the SR4300 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible. Remote-controllable range SR4300 Approx. 5 m 60° OK Remote control unit (RC4300SR) LOADING BATTERIES When you use RC4300SR for the first time, you have to install the batteries. The RC4300SR requires 2 AAA-batteries (2 x 1,5 V) to function. Note • Attached batteries are to check basic function of remote control unit. 1. Remove the back cover. 2. Insert the new batteries (AAA type) with correct (+) and (-) polarity. 3. Close until it clicks. 10