Marantz SR4300 User Guide - Page 26

ENGLISH SPEAKERS LEVEL Here you will set the volume for each speaker so that they are all heard by the listener at the same level. Note: • The speaker level settings is not available in 6.1channel input mode and S-Direct mode. TEST MODE : Selects "MANU (manual)" or "AUTO" for generating mode of test tone or cursor button. If you select "AUTO" by pressing the button, the test tone will be cycled through in a circular pattern which is L (Left) →C (Center) →R (Right) →SR (Surround Right) →SB (Surround Back) →SL (Surround Left) →SW (Subwoofer →L →.. increments of 2 seconds for each channel. Using the and cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker. When you select "TO MAIN MENU" by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button . Or press the or cursor button to select "EXIT" then press the OK button to exit the SETUP MENU. Or press the or cursor button to select "RETURN" then press the OK button to return the previous "SPEAKER DISTANCE" setup. If you select "MANU", adjust the output level of each speaker as follow. 2. 5. BASS M-CH ST 7 2CH 8 F.DIRECT A/D 6.1CH -IN 9 0 OFF 1. 5. SETUP/T.TONE MENU OK S-DIRECT 1. 3. 5. 5. MUTE VOLUME 1. When you select "MANUAL" in T.MODE menu by pressing the or button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the button. This unit will emit the pink noise from the center speaker. MENU STRUCTURE of Speaker Level setup Direct selec Speaker by remote Distance control setup Test Tone mode 2. Using the and cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker (Note that this can be adjusted to any level between -10 and +10 dB in 1dB intervals). Maximum +10dB 1 dB interval Reference 1 dB interval +9dB 0dB -9dB button button Minimum -10dB (SW -15 dB) 3. Press the cursor button again. This unit will now emit the pink noise from the front right speaker. 4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level. 5. When you select "TO MAIN MENU" by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button . Or press the or cursor button to select "EXIT" then press the OK button to exit the SETUP MENU. Or press the or button to select "RETURN" then press the OK button to return the previous "SPEAKER DISTANCE" setup. Notes: • Speakers that you selected "None" for in the Speaker Size Setup menu will not appear. • The setup level for each channel is memorized for reproduction in all surround mode. • To adjust the speaker levels for 6.1-channel input sources, you will need to use the 6.1CH Level Input setup menu. MANU Speaker Speaker L Level setup SL AUTO (Auto) SW C Listening Positiom R SR SB TO MAIN MENU RETURN EXIT MAIN MENU Speaker Distance setup exit SETUP MENU 22