Home » McAfee Manuals » Networking » McAfee IIP-M65K-ISAA » Manual Viewer

McAfee IIP-M65K-ISAA Product Guide - Page 24

Power on the Sensor, Before you begin

View all McAfee IIP-M65K-ISAA manuals

Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

3 Setting up the Sensor Power on the Sensor Power on the Sensor Before you begin Do not attempt to power on the Sensor until you have installed the Sensor in a rack, made all necessary network connections, and connected the power cable to the power supply. If you are installing a redundant power supply, you should install it as described in Installing a power supply. For true redundant operation with the optional redundant power supply, McAfee recommends that you plug each supply into a different power circuit. Task 1 Connect the power cable to the Sensor power supply. 2 Connect the power cable to a power source. The Sensor has no power switch. It powers on as soon as one of its power cable is connected to a power source. Power off the Sensor McAfee recommends that you use the shutdown CLI command to halt the Sensor before powering it down. For more information on CLI commands, see CLI Guide. 24 McAfee® Network Security Platform M-6050 Sensor Product Guide

Section	Page
Contents	3
Preface	5
About this guide	5
Audience	5
Conventions	5
What's in this guide	6
Find product documentation	6
1 Overview	7
About Network Security Sensors	7
Functions of a Sensor	7
Network topology considerations	8
M-6050 key features	9
M-6050 physical description	9
Ports	9
Front panel LEDs	10
2 Before you install	13
Usage restrictions	13
Safety measures	13
About fiber-optic ports	14
Contents of the box	14
Unpack the Sensor	15
3 Setting up the Sensor	17
Setup overview	17
How to position the Sensor	17
Install the rails and ears on the chassis and rack	17
Mount the Sensor on a rack	18
Remove a Sensor from the rack	18
Redundant power supply	19
Install the power supply	19
Remove the power supply	20
Cable the Sensor	20
Small form-factor pluggable modules	21
SFP modules	21
XFP modules	22
Install a module	22
Remove a module	23
Power on the Sensor	24
Power off the Sensor	24
4 Attaching Cables to the Sensor	25
Cable the Console port	25
Cable the Auxiliary port	26
Connect the cable to the Response port	26
About the fail-open port	26
Cable the Management port	26
About connecting cables to the Monitoring ports	27
How to use peer ports	27
Default Monitoring port speed settings	28
Cable types for routers, switches, hubs, and PCs	28
Connect the cables for in-line mode	28
Connect the cables for tap mode	29
Connect the cables for SPAN or hub mode	29
Cable the failover interconnection ports	29
How does the fail-open function work	30
5 Troubleshooting the Sensor	31
6 Sensor technical specifications	33
A Regulatory, compliance, and safety information	35
Index	37
A	37
C	37
D	37
F	37
H	37
K	37
M	37
P	37
R	37
S	37
T	37

Match case Limit results 1 per page

Power on the Sensor

Before you begin

Do not attempt to power on the Sensor until you have installed the Sensor in a rack, made

all necessary network connections, and connected the power cable to the power supply.

If you are installing a redundant power supply, you should install it as described in Installing a power

supply. For true redundant operation with the optional redundant power supply, McAfee recommends

that you plug each supply into a different power circuit.

Task

Connect the power cable to the Sensor power supply.

Connect the power cable to a power source.

The Sensor has no power switch. It powers on as soon as one of its power cable is connected to a

power source.

Power off the Sensor

McAfee recommends that you use the shutdown CLI command to halt the Sensor before powering it

down. For more information on CLI commands, see

CLI Guide.

Setting up the Sensor

Power on the Sensor

McAfee

Network Security Platform

M-6050 Sensor Product Guide