Motorola L702CBT User Guide - Page 23
Replace, Remove, Device, Added, Empty, Bluetooth, Setup Cell, Cells Max., Replace?, Removed,
View all Motorola L702CBT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
For an inactive device (not shown in the active devices list) when there is no free slot in the active devices list (already two active devices): 5. Press MENU (Base) and then or to select REPLACE or REMOVE. If you select REPLACE: 6. Press MENU (Base) and then or to select a device on the active list to be replaced. 7. Press MENU (Base) and display will show DEVICE ADDED, and then the telephone will start to connect the selected cellular device. If you select REMOVE: Follow the steps above. NOTES • When the connected cellular is removed, the corresponding or will be off. • When the disconnected cellular is connected, the corresponding or will be on. • When the cellular is removed, the device name will be removed and EMPTY will be displayed instead in the paired devices list. 3.3.2 Replacing a paired device If you have already paired up four Bluetooth enabled mobile devices, you will need to replace one of them if you would like to pair up another device. Follow the steps below to replace and pair up a new device. 1. Press MENU (Base) and then or to select BLUETOOTH. 2. Press MENU (Base) and then or to select SETUP CELL. 3. Display will show 4 CELLS MAX., and then REPLACE?. 4. Press MENU (Base) to confirm. Display will show the four Cellular names of the paired devices. 5. Press or to select the cellular device you would like to replace. 6. Press MENU (Base) to confirm. Display will show REMOVED, and then CELLULAR READY?. 7. Refer to section 3.2 to proceed with the next steps. NOTE When pairing up a new cellular, the connected cellular will be disabled temporarily. BLUETOOTH® 23