NEC 8M-B70AU Operation Manual 8M-B70AU - Page 126
When the Monitor is connected to a PC with DVI output terminal digital connection
View all NEC 8M-B70AU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Contents 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 7 languages. English >> Deutsch >> Français >> Italiano >> Español Polski >> Ver. 1.01 > AQUOS LINK and Other Devices < Connecting PC When the Monitor is connected to a PC with DVI output terminal (digital connection) Be sure to use the supplied conversion cable. When using any conversion cable other than the supplied one, the Monitor may not operate properly, or breakages may occur. A commercially available DVI / HDMI conversion cable and an audio cable are required. Use an audio cable that is compatible with the terminal of PC. Even though the HDMI terminal of the Monitor and the DVI terminal of a PC are connected with a conversion cable, the screen of the PC might not be displayed correctly or not displayed at all. This is because some PC are not supported with the HDMI standard. "This input signal is not supported" message will be displayed when an unsupported signal is input. In such situation, refer to the operation manual of the connected PC and change to the supported signal. After switching to INPUT 1, select "Setup" - " (Option)" -"Terminal setting" - "INPUT1 audio select" from the Menu, and then select "Analog audio input". 5-31