NEC 8M-B70AU Operation Manual 8M-B70AU - Page 128
When the Monitor is connected to a PC with analog RGB output terminal digital connection
View all NEC 8M-B70AU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Contents 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 7 languages. English >> Deutsch >> Français >> Italiano >> Español Polski >> Ver. 1.01 > AQUOS LINK and Other Devices < Connecting PC When the Monitor is connected to a PC with analog RGB output terminal (digital connection) Be sure to use the supplied conversion cable.When using any conversion cable other than the supplied one, the Monitor may not operate properly, or a part may be broken. A commercially available D-sub cable and an audio cable are required. Use an audio cable that is compatible with the PC terminal. After switching to INPUT 6, select "Setup" - " (Option)" -"Terminal setting" - "INPUT6 audio select" from the Menu, and then select "Analog audio input". 5-33