NEC 8M-B70AU Operation Manual 8M-B70AU - Page 141
General, 8K input
View all NEC 8M-B70AU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Contents 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 7 languages. English >> Deutsch >> Français >> Italiano >> Español Polski >> Ver. 1.01 > Troubleshooting < If You Suspect a Problem General What if Where to check Reference page Input change does not allow selection Is the input skip set to "No"? 5-23 The power turns off automatically Check if the Monitor is in the mode where it is turned off automatically. ― The POWER lamp does not go off at the press of the power button on the Monitor If the power button setting is set to "Mode1", the power turns off at the press of the power button on the Monitor, but the POWER lamp stays lit. The lamp is lit red (standby). 3-4 8K input What if Not shown as 4320p Where to check Check if four HDMI cables are inserted into A to D of INPUT 7. Check the resolution of the output device. Reference page 5-1 to 5-3 No video appears Any connections to HDMI 1 to 4? 5-1 to 5-2 No sound is coming out Go to "INPUT7 audio select" where you should select the audio input terminal used. The compatible format is Linear PCM only. 5-4 If any problem persists after you try the corresponding solution above, be sure to unplug the power plug and then contact your local distributor. 7-7