NEC LCDMT810 User Manual - Page 15
Power, Usage, Management
View all NEC LCDMT810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
USERS MANUAL Power Menu Provides access to Lamp Usage information and the Auto Start and Power Management features. Use the "Select" button on the projector cabinet or (A) (V) buttons on your remote control to access a submenu. Then press "Adjust" (+) or (-) to choose a specific option. Lamp Usage This tells you how long the lamp has been in operation. It is recommended that you replace a lamp after 2000 hours of service. After you install a new lamp, select this icon and press and hold the "Power On" button on the remote control for ten seconds to reset the lamp clock back to zero. NOTE: The projector will turn off and go into stand by mode after 2100 hours of service. If this happens, press the "Power Off" button on the remote controlfor ten seconds to reset the lamp clock back to zero. Do this only after replacing the lamp. Auto Start Turns the LCD projector on automatically when the main power switch is turned on. This eliminates the need to always use the "Power" button on the remote control or projector cabinet. Press (+) to turn this feature on and (-) to turn it off. Power Management When "Power Off" is on and there is no RGB video input for five minutes or more, the projector will automatically turn itself off. Press the (+) to turn this feature on and (-) to turn it off. This feature does not work with Video or S-Video sources. OPERATION 58 3-29