NEC NP-M311X Users Manual
NEC NP-M311X Manual
 |
View all NEC NP-M311X manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP-M311X manual content summary:
- NEC NP-M311X | Users Manual - Page 1
Portable Projector M361X/M311X/M271X/ M311W/M271W User's Manual The M361X and M271X are not distributed in North America. Model No. NP-M361X, NP-M311X, NP-M271X, NP-M311W, NP-M271W - NEC NP-M311X | Users Manual - Page 2
more information on each software, see "readme.pdf" inside the "about GPL&LGPL" folder on the supplied CDROM. NOTES (1) The contents of this user's manual may not be reprinted in part or whole without permission. (2) The contents of this user's manual are subject to change without notice. (3) Great - NEC NP-M311X | Users Manual - Page 3
read this manual carefully before using your NEC projector and keep the manual handy for part inside of the unit. This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems - NEC NP-M311X | Users Manual - Page 4
those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the - NEC NP-M311X | Users Manual - Page 5
is emitted from the light output. Place the projector in a horizontal position The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 10° Fire and Shock - NEC NP-M311X | Users Manual - Page 6
does not operate normally when you follow the instructions described in this user's manual. - If the projector has been dropped or the cabinet has been damaged. - If the projector exhibits a distinct change in performance, indicating a need for service. • Disconnect the power cord and any other - NEC NP-M311X | Users Manual - Page 7
then disconnect the power cord. Allow at least one hour for the lamp to cool before handling. • When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out. About High Altitude mode • Set [FAN MODE - NEC NP-M311X | Users Manual - Page 8
Information i 1. Introduction...1 1 What's in the Box?...1 Introduction to the Projector 2 Congratulations on Your Purchase of the Projector 2 Features you'll enjoy 2 About this user's manual 3 Part Names of the Projector 4 Front/Top...4 Rear...5 Top Features...6 Terminal Panel Features - NEC NP-M311X | Users Manual - Page 9
Functions [SETUP 83 [GENERAL]...83 [MENU]...85 [INSTALLATION]...87 [OPTIONS(1)]...89 [OPTIONS(2)]...91 Setting up the Projector for a Wired LAN Connection [WIRED LAN 93 Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless LAN Unit equipped) [WIRLESS LAN 94 7 Menu - NEC NP-M311X | Users Manual - Page 10
and Connections 100 Setting Up the Screen and the Projector 100 Selecting a Location 100 Throw Distance and Screen Size 102 Cleaning the Cabinet 116 4 Replacing the Lamp and the Filters 117 8. Appendix...122 Troubleshooting...122 Indicator Messages 122 Common Problems & Solutions 123 If - NEC NP-M311X | Users Manual - Page 11
(For Other countries than North America: 7N8N3151 and 7N8N3161) • Quick Setup Guide (7N8N3171)/ (7N8N3181) NEC Projector CD-ROM User's manual (PDF) and the utility software (7N951851) For North America only Limited warranty For customers in Europe: You will find our current valid Guarantee Policy - NEC NP-M311X | Users Manual - Page 12
to prolong the projector's lamp life up to 10000 hours (up to 5000 hours in ECO MODE OFF). *3 M361X/M311W: 8000 hours (up to 4000 hours in ECO MODE OFF). • HDMI input port provides digital signal The HDMI input provides HDCP compatible digital signals. The HDMI input also supports audio signal. • 10 - NEC NP-M311X | Users Manual - Page 13
the supplied CD-ROM The supplied NEC Projector includes four programs: Virtual Remote M311X/M271X)/WXGA (M311W/M271W) native resolution. • CRESTRON ROOMVIEW compatibility The projector supports review the user's manual. This may save you time later on. At the beginning of each section of the manual - NEC NP-M311X | Users Manual - Page 14
Part Names of the Projector Front/Top Zoom Lever (→ page 20) Focus Ring (→ page 20) Exhaust Vent Heated air is exhausted from here. Lens Cover Adjustable Tilt Foot Lever (→ page - NEC NP-M311X | Users Manual - Page 15
end into an active wall outlet. (→ page 14) * This security slot supports the MicroSaver ® Security System. Opening and closing the lens cover Slide the lens closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about 2 hours, it will turn off - NEC NP-M311X | Users Manual - Page 16
Features 9 10 8 11 5 6 7 3 4 1/2 1. (POWER) Button (→ page 15, 24) 2. POWER Indicator (→ page 14, 15, 24, 122) 3. STATUS Indicator (→ page 122) 4. LAMP Indicator (→ page 117, 122) 5. ECO Button (→ page 27) 6. SOURCE Button (→ page 17) 7. AUTO ADJ. Button (→ page 23) 8. MENU Button (→ page - NEC NP-M311X | Users Manual - Page 17
) 14. PC CONTROL [PC CONTROL] Port (D-Sub 9 Pin) (→ page 130) Use this port to connect a PC or control system. This enables you to control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 130. 7 - NEC NP-M311X | Users Manual - Page 18
1. Introduction Part Names of the Remote Control 1 3 7 2 5 4 6 8 10 9 15 11. VIEWER page 23) 30. ASPECT Button (→ page 81) 31. FOCUS/ZOOM Button (not available on this series of projectors) 32. HELP Button (→ page 96) * The MOUSE L-CLICK and MOUSE R-CLICK buttons work only when a - NEC NP-M311X | Users Manual - Page 19
signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of the remote sensor on the projector cabinet. • The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries - NEC NP-M311X | Users Manual - Page 20
inserted into the projector. (→ page 67) NOTE: • Image Express Utility Lite does not support "Meeting Mode" in Image Express Utility 2.0 included with our other models. Download service For the update information about these software programs, visit our website: URL: http://www.nec-display.com/dl - NEC NP-M311X | Users Manual - Page 21
Service Pack 3 or later Windows XP Professional (32-bit version) Service Pack 3 or later • Windows power-saving function is not supported. × 768) recommended 1024 dots × 768 lines - 1280 dots × 800 lines recommended (M311W/ M271W) High Color (15 bits, 16 bits) True Color (24 bits, 32 bits) (recommended - NEC NP-M311X | Users Manual - Page 22
TCP/IP Only wireless LAN units built into Mac are guaranteed to work with Image Express Utility Lite. "Easy Connection" supports only wireless LAN. VGA (640 × 480) or higher required XGA (1024 × 768) recommended (1024 × 768 - 1280 × 800 recommended for M311W/M271W) 16.70 million colors required 12 - NEC NP-M311X | Users Manual - Page 23
onto the screen. Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 14) Step 2 • Turning on the projector (→ page 15) Step 3 • Selecting a source (→ page 17) Step 4 • Adjusting the picture size and position (→ page 18) • Correcting keystone distortion - NEC NP-M311X | Users Manual - Page 24
page 122) COMPUTER 1 IN Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. To wall outlet ← CAUTION: Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal - NEC NP-M311X | Users Manual - Page 25
locked! Enter your password." is displayed, it means that the [SECURITY] feature is turned on. (→ page 29) After you turn on your projector, ensure that the computer or video source is turned on and that the lens cover is open. Standby NOTE: When no input signal is present, - NEC NP-M311X | Users Manual - Page 26
on to protect the internal system. If this happens, wait for the projector's internal components to cool down. • When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp. • If the STATUS indicator lights orange with the power button pressed, it - NEC NP-M311X | Users Manual - Page 27
, NETWORK, or USB DISPLAY buttons. Selecting Default Source You can set a source as the default source so that it will be displayed each time the projector is turned on. 1. Press the MENU button. The menu will be displayed. 2. Press the button twice to select [SETUP] and press the H button or the - NEC NP-M311X | Users Manual - Page 28
] (→ page 20) Adjusting the keystone correction [KEYSTONE]* (→ page 21) Automatic Keystone Correction function is turned on at the time of shipment. To perform keystone correction manually, see "6. Correcting Keystone Distortion Manually" on page 21. 18 - NEC NP-M311X | Users Manual - Page 29
-foot for purposes other than originally intended. 3 Misuses such as using the tilt foot to carry or hang (from the wall or ceiling) the projector can cause damage to the projector. Adjusting the left and right tilt of an image [Rear foot] • Rotate the rear foot. The rear foot can be extended up - NEC NP-M311X | Users Manual - Page 30
2. Projecting an Image (Basic Operation) Zoom Use the ZOOM lever to adjust the image size on the screen. Zoom Lever Focus Use the FOCUS ring to obtain the best focus. Focus Ring 20 - NEC NP-M311X | Users Manual - Page 31
vertically, keystone distortion becomes large. Automatic Keystone Correction function is turned on at the time of shipment. To correct keystone distortion manually, proceed with the following steps to correct keystone distortion. NOTE: • The Keystone correction can cause an image to be slightly - NEC NP-M311X | Users Manual - Page 32
Adjusting with the remote control 1. Press the KEYSTONE button. The Keystone bar will be displayed. 2. Projecting an Image (Basic Operation) 2. Use the or button to correct the keystone distortion. Adjust so that the right and left sides are parallel. 3. Press the EXIT button. The Keystone - NEC NP-M311X | Users Manual - Page 33
signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 79, 80) Turning Up or Down Volume Sound level be adjusted. TIP: When no menus appear, the and buttons on the projector cabinet work as a volume control. NOTE: • Volume control is not available with the - NEC NP-M311X | Users Manual - Page 34
press the (POWER) or the POWER OFF button again. The lamp will turn off and the projector will go into standby mode. When in standby mode, the blue light Standby Steady orange light CAUTION: Parts of the projector may become temporarily heated if the projector is turned off with the POWER button - NEC NP-M311X | Users Manual - Page 35
the soft case with the lens facing upward as shown below. This is to prevent the lens from damage. Insert the projector with the lens facing upward NOTE: When placing the projector in the soft case, retract the tilt foot and the rear feet. Failure to do so may case damage to - NEC NP-M311X | Users Manual - Page 36
image and sound. The projector's power-saving function will work 10 seconds after the image is turned off. As a result, the lamp power will be reduced. can be turned off. • Even when the power-saving function works, the lamp power may be restored to its original level temporarily. • To restore the - NEC NP-M311X | Users Manual - Page 37
visible depending on the image. [NORMAL] [ECO] Lamp power consumption. (approx.80% brightness on M311X/M271X/M271W and approx. 75% on M361X/M311W) The lamp life will extend by lowering the lamp power. Lamp power consumption (approx. 60% brightness). The lamp life will extend longer than the one on - NEC NP-M311X | Users Manual - Page 38
used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME]. • The projector is always in [NORMAL] for 90 seconds after the lamp is turned on and while the POWER indicator is blinking green. The lamp condition will not be affected even when [ECO MODE] is changed. • After a lapse of 1 minute - NEC NP-M311X | Users Manual - Page 39
When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the projector cannot project an image. • The [SECURITY] ENTER button. NOTE: A keyword must be 4 to 10 digits in length. The [CONFIRM KEYWORD] screen will be displayed. 29 - NEC NP-M311X | Users Manual - Page 40
the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER button. The projector will be turned on and display a message to the effect that the projector is locked. 2. Press the MENU button. 3. Type in the correct keyword and - NEC NP-M311X | Users Manual - Page 41
To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 3. Convenient Features 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen - NEC NP-M311X | Users Manual - Page 42
NEC Projector CD-ROM, Virtual Remote screen (or toolbar) can be displayed on your computer screen. This will help you perform operations such as projector is not supported by Virtual Remote Tool. • For update information on Virtual Remote Tool, visit our website: http://www.nec-display.com/dl - NEC NP-M311X | Users Manual - Page 43
M311X/M271X: Horizontal 1024 × vertical 768 dots or less M311W/M271W: Horizontal 1280 × vertical 800 dots or less - Number of colors: 256 colors or less TIP: • The projector's COMPUTER 1 IN connector supports Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The menu window - NEC NP-M311X | Users Manual - Page 44
. Read "END USER LICENSE AGREEMENT" carefully. 4 If you agree, click "I accept the terms in the license agreement" and then click "Next". • Follow the instructions on the installer screens to complete the installation. • When the installation is complete, you will return to the menu window. 34 - NEC NP-M311X | Users Manual - Page 45
window will be displayed. 3 Click Virtual Remote Tool from the list and then click "Remove". Follow the instructions on the screens to complete the uninstallation. Step 2: Connect the projector to the computer 1 Use the supplied computer cable (VGA) to connect the COMPUTER 1 IN connector of the - NEC NP-M311X | Users Manual - Page 46
menu • Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool] → [Virtual Remote Tool]. When for the first time, "Easy Setup" window will be displayed. Follow the instructions on the screens When "Easy Setup" is completed, the Virtual Remote Tool - NEC NP-M311X | Users Manual - Page 47
2. Click "Help". The Help screen will be displayed. • Displaying the help file using the Start Menu. 1. Click "Start" → "All programs" or "Programs" → "NEC Projector User Supportware" → "Virtual Remote Tool" → and then "Virtual Remote Tool Help" in this order. The Help screen will be displayed. 37 - NEC NP-M311X | Users Manual - Page 48
while you freeze or magnify an image. - Using the USB cable to connect the projector and the computer will also start USB Display function. USB (PC) USB cable (not supplied) NOTE: • A USB cable must support the USB 2.0 Specifications. • The mouse function can be used with the following operating - NEC NP-M311X | Users Manual - Page 49
on Windows XP, the Windows user account must have "Administrator" privilege. • USB Display uses functions of Image Express Utility Lite contained on NEC Projector CD-ROM (→ page 52). Starting USB Display, however, will not install Image Express Utility Lite on your computer. This is because USB - NEC NP-M311X | Users Manual - Page 50
(1) (2) (3) (4) (5) 3. Convenient Features (1) (Source Selects an input source of the projector. (2) (Picture Turns on or off AV-MUTE (Picture mute), and turns on or Utility Lite. You can also turn off the projector at the same time. (6) (Help Displays the help of Image Express Utility Lite. 40 - NEC NP-M311X | Users Manual - Page 51
projector is connected to a wired/wireless network, lamp replace time or error messages will be sent via e-mail. 3. Operating the projector projector and enter the following URL : http:// - NEC NP-M311X | Users Manual - Page 52
in the "HOSTS" file of the computer being used. Example 1: W hen the host name of the projector has been set to "pj.nec.co.jp", access is gained to the network setting by specifying http://pj.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: W hen - NEC NP-M311X | Users Manual - Page 53
LAN signal. USB DISPLAY Switches to the USB Port (PC). PROJECTOR STATUS: This displays the condition of the projector. LAMP LIFE REMAINING Displays the remaining life of the lamp as a percentage. LAMP HOURS USED Displays how many hours the lamp has been used. FILTER HOURS USED Displays how many - NEC NP-M311X | Users Manual - Page 54
country and region. When you select [INFRASTRUCTURE], make sure that the projector and your access point are on the same channel; when you select [AD HOC], make sure that the projector and your computer are on the same channel. PROFILE 1/PROFILE 2 Two - NEC NP-M311X | Users Manual - Page 55
bit] in [SECURITY TYPE]: Enter WEP key. Select Characters (ASCII) Hexadecimal digit (HEX) WEP 64 bit Up to 5 characters Up to 10 characters WEP name for your projector so that your computer can identify the projector. A projector name must be 16 characters or less. TIP: Projector name will not - NEC NP-M311X | Users Manual - Page 56
projector: The lamp and filters are at the end of its usable life. Please replace the lamp and filters. Projector Name: NEC Projector Lamp to reflect the above settings. • NETWORK SERVICE PJLink PASSWORD HTTP PASSWORD AMX BEACON Set a JBMIA) in 2005. The projector supports all the commands of - NEC NP-M311X | Users Manual - Page 57
• ROOMVIEW for managing from the computer. DISABLE Disables ROOMVIEW. ENABLE Enables ROOMVIEW. 3. Convenient Features • CRESTRON CONTROL for managing from the controller. DISABLE Disables CRESTRON CONTROL. ENABLE Enables CRESTRON CONTROL. IP ADDRESS Set your IP address of CRESTRON SERVER - NEC NP-M311X | Users Manual - Page 58
Utility Pro 4/ Pro 5) Using the utility software "PC Control Utility Pro 4" and "PC Control Utility Pro 5" included on the companion NEC Projector CD-ROM, the projector can be controlled from a computer over a LAN. PC Control Utility Pro 4 is a program compatible with Windows. (→ this page) PC - NEC NP-M311X | Users Manual - Page 59
USER LICENSE AGREEMENT" carefully. 4 If you agree, click "I accept the terms in the license agreement" and then click "Next". • Follow the instructions on the installer screens to complete the installation. • When the installation is complete, you will return to the menu window. TIP: • Uninstalling - NEC NP-M311X | Users Manual - Page 60
instructions in "Connecting to a Wired LAN" (→ page 110), "Connecting to a Wireless LAN (Optional: NP02LM series)" (→ page 111) and "9. Controlling the Projector by Using an HTTP Browser" (→ page 41) Step 3: Start PC Control Utility Pro 4 Click "Start" → "All programs" or "Programs" → "NEC Projector - NEC NP-M311X | Users Manual - Page 61
PC Control Utility Pro 5 on the computer 1. Insert the accompanying NEC Projector CD-ROM in your Mac CD-ROM drive. The CD-ROM icon instructions on the installer screens to complete the installation. Step 2: Connect the projector to a LAN Connect the projector to the LAN by following the instructions - NEC NP-M311X | Users Manual - Page 62
over a LAN (Image Express Utility Lite) Using Image Express Utility Lite contained on the supplied NEC Projector CD-ROM allows you to send the computer's screen image to the projector over a USB cable or a wired or wireless LAN. Image Express Utility Lite is a program compatible with Windows - NEC NP-M311X | Users Manual - Page 63
the instructions in "Connecting to a Wired LAN" (→ page 110), "Connecting to a Wireless LAN (Optional: NP02LM series)" (→ page 111) and "9. Controlling the Projector by Using an HTTP Browser" (→ page 41) Step 3: Start Image Express Utility Lite. 1. On Windows, click "Start" → "All programs" → "NEC - NEC NP-M311X | Users Manual - Page 64
" → "Help" on the edit window. The Help screen will be displayed. • Displaying the help file using the Start Menu. Click "Start" → "All programs" or "Programs" → "NEC Projector User Supportware" → "Image Express Utility Lite" → "Image Express Utility Lite Help". The Help screen will be displayed. 54 - NEC NP-M311X | Users Manual - Page 65
it is copied beforehand. This will eliminate the trouble of installing Image Express Utility Lite to your the "IEU_Lite (removable-media)" folder in the supplied NEC Projector CD-ROM to the root directory of your removable supported when Image Express Utility Lite is started from removable media. 55 - NEC NP-M311X | Users Manual - Page 66
Express Utility Lite for Mac OS on the computer 1. Insert the accompanying NEC Projector CD-ROM in your Mac CD-ROM drive. The CD-ROM icon folder in Mac OS. Step 2: Connect the projector to a LAN Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page - NEC NP-M311X | Users Manual - Page 67
" and "Parameters Correction", see the help file of Image Express Utility Lite. (→ page 54, 56) • Your correction data can be stored in the projector or your computer which can be restored when necessary. • The GCT function is available with a USB cable, wired or wireless LAN connection, and video - NEC NP-M311X | Users Manual - Page 68
to exit the GCT. TIP: • After performing the 4-point correction, you can save the 4-point correction data to the projector by clicking "File" → "Export to the projector..." on the "4-point Correction" window. • See the Help of Image Express Utility Lite for operating "4-point Correction" window and - NEC NP-M311X | Users Manual - Page 69
can be conducted simply with the projector. • Supported graphic format is JPEG. • The Viewer displays the thumbnail screen (JPEG Exif only) on which you can jump to any specific image you wish to project. • There are two ways of playback for slideshow: manual - NEC NP-M311X | Users Manual - Page 70
- We do not warrant that the USB port of the projector will support all USB memories in the market. • Supported images - Supported file format for Viewer are as follows. We do not warrant (Exif) is a standard image file format used by digital cameras with the addition of specific shooting data. 60 - NEC NP-M311X | Users Manual - Page 71
- Exiting the Viewer page 63 Preparation: Before starting the Viewer, store images to the USB memory using your computer. Starting the Viewer 1. Turn on the projector. (→ page 15) 2. Insert the USB memory into the USB port of the projec- tor. WIRELESS • Do not remove the USB memory from the - NEC NP-M311X | Users Manual - Page 72
4. Press the ENTER button. The thumbnail screen will be displayed. (→ page 64) 5. Use the ▲▼◀ or ▶ button to select an icon. • The → (arrow) symbol on the right indicates there are more pages. pressing the PAGE ▽ (page down) button will show the next page: pressing the PAGE △ (page up) will show the - NEC NP-M311X | Users Manual - Page 73
1. Select the VIEWER start screen. Press the EXIT button with no menu displayed. 4. Using the Viewer WIRELESS 2. Remove the USB memory from the projector. Make sure that the LED on the USB memory is not flashing before removing the USB memory. NOTE: If you remove the USB memory from - NEC NP-M311X | Users Manual - Page 74
Parts of each screen the USB memory is inserted into the projector. This screen will show a list of is different depending on the model. M361X, M311X, and M271X are 5 by 4 M311W and M271W are 6 by 4 The (→ page 65) This screen is used for manual playback. The selected image will be displayed in - NEC NP-M311X | Users Manual - Page 75
Using the toolbar 4. Using the Viewer 1. Press the MENU button. The toolbar will be displayed. The SOURCE screen will be displayed as Viewer connection screen. 2. Use the ◀ or ▶ button to select an item and use the ▲ or ▼ button to select its available option. When the cursor is placed, the - NEC NP-M311X | Users Manual - Page 76
from the highlighted item. Closes the menu and displays the image in its actual size. Closes the menu and displays the image in the projector's maximum resolution. Close the menu and rotate the image 90°clockwise - Close the menu and rotate the image 90°counter clockwise Slideshow toolbar - NEC NP-M311X | Users Manual - Page 77
will be created where JPEG files will be saved to. The projector's Viewer does not support index file (with extension .idx). Install Viewer PPT Converter 3.0 running, the installation may not be completed. 1. Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The menu window will - NEC NP-M311X | Users Manual - Page 78
in the license agreement" and then click "Next". • Follow the instructions on the installer screens to complete the installation. • When the installation is • Starting Click Window's [Start] → [All Programs] → [NEC Projector User Supportware] → [Viewer PPT Converter 3.0] → [Viewer PPT Converter - NEC NP-M311X | Users Manual - Page 79
USB memory 1. Insert the USB memory into the USB port of the computer. 2. On Windows, click "Start" → "All programs" → "NEC Projector UserSupportware" → "Viewer PPT Converter 3.0" → "Viewer PPT Converter 3.0". Viewer PPT Converter 3.0 will start. 3. Click "Brows..." and select a PowerPoint file you - NEC NP-M311X | Users Manual - Page 80
display the submenu window. 6. Adjust the level or turn the selected item on or off by using the buttons on the remote control or the projector cabinet. Changes are stored until adjusted again. 7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the - NEC NP-M311X | Users Manual - Page 81
2 Menu Elements Tab Available buttons Source Highlight 5. Using On-Screen Menu Slide bar Solid triangle Radio button Wireless symbol ECO mode symbol High Altitude symbol Thermometer symbol Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements - NEC NP-M311X | Users Manual - Page 82
DETAIL LARGE, MEDIUM, SMALL 5000, 6500, 7800, 8500, 9300, 10500 OFF, ON STILL, MOVIE OFF, ON 0[%], 5[%], 10[%] M361X/M311X/M271X: AUTO, 4:3, 16:9, 15:9, 16:10, WIDE ZOOM, NATIVE M311W/M271W: AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVE −96 to 96 OFF, ON OFF, ON OFF, WHITEBOARD, BLACKBOARD - NEC NP-M311X | Users Manual - Page 83
SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BLUE BLUE, BLACK, LOGO M311X/M271X/ M311X/M271X/M271W: OFF, 100[H], 500[H], 1000[H], M271W: 6000[H] 2000[H], 6000[H] M361X/M311W: M361X/M311W: OFF, 100[H], 500[H], 1000[H], 2000[H], 5000[H] 5000[H] DESKTOP DESKTOP FRONT, CEILING REAR, DESKTOP - NEC NP-M311X | Users Manual - Page 84
LAN SSID NETWORK TYPE WEP/WPA CHANNEL SIGNAL LEVEL VERSION FIRMWARE DATA PROJECTOR NAME MODEL NO. OTHERS SERIAL NUMBER LAN UNIT TYPE CONTROL ID (when [CONTROL ID] is set) CURRENT SIGNAL ALL DATA CLEAR LAMP HOURS CLEAR FILTER HOURS Default 5. Using On-Screen Menu Options * The - NEC NP-M311X | Users Manual - Page 85
5. Using On-Screen Menu 4 Menu Descriptions & Functions [SOURCE] COMPUTER 1 and 2 Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal. NOTE: When the component input signal is connected to the COMPUTER 1 IN or COMPUTER 2 IN connector, select [COMPUTER 1] or [ - NEC NP-M311X | Users Manual - Page 86
. NOTE: • The [DICOM SIM.] option is for training/reference only and should not be used for actual diagnosis. • DICOM stands for Digital Imaging and Communications in Medicine. It is a standard developed by the American College of Radiology (ACR) and the National Electrical Manufacturers Association - NEC NP-M311X | Users Manual - Page 87
5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT Recommended for - NEC NP-M311X | Users Manual - Page 88
Enhancing the Color [COLOR ENHANCEMENT] This function allows you to enhance the color of image. OFF Does not enhance the color ON Enhances the color. 5. Using On-Screen Menu NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE]. Adjusting White Balance [WHITE BALANCE - NEC NP-M311X | Users Manual - Page 89
Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK Use this item to fine phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use [PHASE] only after the [CLOCK] is complete - NEC NP-M311X | Users Manual - Page 90
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. 5. Using On-Screen Menu NOTE: The [HORIZONTAL] and [VERTICAL] items are not available for VIDEO, S-VIDEO, HDMI, VIEWER, NETWORK, and USB DISPLAY. - An image can be distorted during - NEC NP-M311X | Users Manual - Page 91
resolutions and aspect ratios that most computers support. Resolution VGA 640 × 480 SVGA 800 10 WIDE ZOOM (M361X/M311X/M271X) LETTERBOX (M311W/M271W) NATIVE Function The projector will automatically determine the The image is stretched left and right. Parts of the displayed image are cropped at - NEC NP-M311X | Users Manual - Page 92
when the appropriate aspect ratio is automatically determined M361X/M311X/M271X [Computer signal] Aspect ratio of incoming signal from 16:9 to 4:3. Adjusting the Vertical Position of Image [POSITION] (not available on M311W/M271W) (only when [16:9], [15:9], or [16:10] is selected for [ASPECT - NEC NP-M311X | Users Manual - Page 93
manually, select [OFF]. NOTE: The [AUTO KEYSTONE] function is not available when an orientation type such as [CEILING REAR], [DESKTOP REAR], [CEILING Saving your change once affects all sources. The changes are saved when the projector is turned off. NOTE: When [AUTO KEYSTONE] is set to [ON], - NEC NP-M311X | Users Manual - Page 94
quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces lamp brightness. Setting Eco Mode [ECO MODE] The ECO MODE increases lamp life, while lowering power consumption and cutting down on CO2 emissions. Four brightness modes of the - NEC NP-M311X | Users Manual - Page 95
is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3 MINUTES] message will be displayed on the bottom of the screen. Selecting Menu Language [LANGUAGE] You can choose one of 29 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the - NEC NP-M311X | Users Manual - Page 96
you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO page 114) Six options are available: M311X/M271X/M271W: OFF, 100[H], 500[H], 1000[H], 2000[H], 6000[H] M361X/M311W: OFF, 100[H], 500[H], 1000[H], 2000 - NEC NP-M311X | Users Manual - Page 97
Menu Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT Disabling - NEC NP-M311X | Users Manual - Page 98
CONTROL ID set- ting. NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.) • Your setting will not be affected even when [RESET] is - NEC NP-M311X | Users Manual - Page 99
Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in on the projector. • Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE] can cause the lamp to - NEC NP-M311X | Users Manual - Page 100
manually. Normally select [AUTO] and the projector will automatically detect the video standard. In the case where the projector of M361X/M311X/M271X. • The [ON] is selected at the time of shipment of M311W/M271W. Enabling [HDMI] to switch the HDMI IN digital audio signal and select [COMPUTER 2] to - NEC NP-M311X | Users Manual - Page 101
emission reduction. • Your setting will not be affected even when [RESET] is done from the menu. Enabling Direct Power On [DIRECT POWER ON] Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the need to always use the POWER button on the - NEC NP-M311X | Users Manual - Page 102
turned on. COMPUTER2 Displays the computer signal from the COMPUTER 2 IN connector every time the projector is turned on. HDMI Displays the digital source from the HDMI IN connector every time the projector is turned on. VIDEO Displays the Video source from the VIDEO IN connector every time the - NEC NP-M311X | Users Manual - Page 103
will be turned off. Wired LAN connection will be turned on. ON IP address, subnet mask, and gateway will be automatically assigned to the projector from your DHCP server. OFF Specify IP address, subnet mask, and gateway assigned by your network administrator. Set your IP address of the network - NEC NP-M311X | Users Manual - Page 104
] Wireless LAN connection will be turned off [EASY CONNECTION] Select [EASY CONNECTION] to execute a wireless LAN easily using Image Express Utility Lite on the supplied NEC Projector CD-ROM. [PROFILE 1] [PROFILE 2] Up to two settings for the USB wireless LAN unit can be stored in memory of the - NEC NP-M311X | Users Manual - Page 105
[CONNECTION] and select [INFRASTRUCTURE] or [AD HOC]. (→ page 44) To receive lamp replacement time or error messages via e-mail: Access the HTTP server function to display the the PC and projector via a wireless LAN. The Image Express Utility Lite is contained on the supplied NEC Projector CD-ROM. - NEC NP-M311X | Users Manual - Page 106
is pressed. To dismiss this message, press any button on the projector or the remote control. OFF/AUTO ECO 4000 5000 Lamp life(H) ECO MODE NORMAL 5000 6000 ECO 8000 10000 Replacement lamp Model NP16LP NP15LP M361X/M311W M311X/M271X/M271W • [TOTAL CARBON SAVINGS] This displays the estimated - NEC NP-M311X | Users Manual - Page 107
[SOURCE] 5. Using On-Screen Menu [SOURCE NAME] [HORIZONTAL FREQUENCY] [SIGNAL TYPE] [SYNC TYPE] [SCAN TYPE] [WIRED LAN] [SOURCE INDEX] [VERTICAL FREQUENCY] [VIDEO TYPE] [SYNC POLARITY] [IP ADDRESS] [SUBNET MASK] [GATEWAY] [MAC ADDRESS] [WIRELESS LAN] [IP ADDRESS] [SUBNET MASK] [GATEWAY] [ - NEC NP-M311X | Users Manual - Page 108
[VERSION] [FIRMWARE] Version [DATA] Version [OTHERS] [PROJECTOR NAME] [MODEL NO.] [SERIAL NUMBER] [LAN UNIT TYPE] [CONTROL ID] (when [CONTROL ID] is set) 5. Using On-Screen Menu 98 - NEC NP-M311X | Users Manual - Page 109
projector for another 100 hours after the lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero. Do this only after replacing - NEC NP-M311X | Users Manual - Page 110
not in use, cover the lens with the sliding lens cover. To the wall outlet. Setting Up the Screen and the Projector Selecting a Location [M361X/M311X/M271X] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" (0.64 - NEC NP-M311X | Users Manual - Page 111
6. Installation and Connections [M311W/M271W] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" (0.64 m) measured diagonally when the projector is roughly 37 inches (0.9 m) from the wall or screen. The largest the - NEC NP-M311X | Users Manual - Page 112
of the projector and bottom (top of screen for ceiling ap- plication) Lens center values and Screen bottom may vary. [M361X/M311X/M271X] Diagonal Screen Size Width Height B 8294 - 543 13784 -28 -714 10.7 - 6.5 [M311W/M271W] Diagonal Screen Size Width Height B C wide tele - NEC NP-M311X | Users Manual - Page 113
WARNING * Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. * Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured - NEC NP-M311X | Users Manual - Page 114
PC is not turned on unless connected to the projector before being powered up. * If the screen goes display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn supported by Plug & Play (DDC2) COMPUTER 1 IN analog Yes INPUT COMPUTER 2 IN analog Yes HDMI digital - NEC NP-M311X | Users Manual - Page 115
COMPUTER 1 COMPUTER 2 HDMI USB DISPLAY Button on the remote control (COMPUTER 1) (COMPUTER 2) HDMI (USB DISPLAY) NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video or S-Video source is played - NEC NP-M311X | Users Manual - Page 116
Computer cable (VGA) (supplied) Stereo mini-plug audio cable (not supplied) AUDIO IN PHONE You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you're projecting. NOTE: • Daisy chain connection is not possible. • When audio - NEC NP-M311X | Users Manual - Page 117
connector SOURCE button on the projector cabinet Button on the remote control VIDEO IN VIDEO (VIDEO) S-VIDEO IN S-VIDEO (S-VIDEO) NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs. NOTE: Refer to your VCR owner's manual for more information about your - NEC NP-M311X | Users Manual - Page 118
radio button. • Select the source name for its appropriate input connector after turning on the projector. Input connector COMPUTER 1 IN COMPUTER 2 IN SOURCE button on the projector cabinet COMPUTER 1 COMPUTER 2 Button on the remote control (COMPUTER 1) (COMPUTER 2) NOTE: Refer to your DVD - NEC NP-M311X | Users Manual - Page 119
notebook type PC to the HDMI IN connector of your projector. NOTE: The HDMI IN connector supports Plug & Play (DDC2B). HDMI IN HDMI HDMI cable instruction manual of the audio video equipment to be connected. • When connecting the HDMI IN connector of the projector to the DVD player, the projector - NEC NP-M311X | Users Manual - Page 120
a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [WIRED LAN]. (→ page 93). Example of LAN connection Example of wired LAN connection Server Hub LAN cable (not supplied) NOTE: Use - NEC NP-M311X | Users Manual - Page 121
the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove the USB Wireless LAN Unit from the projector. • Buy the appropriate USB Wireless LAN Unit for your country or area. NOTE: • The green LED on the USB Wireless LAN Unit flashes to show - NEC NP-M311X | Users Manual - Page 122
beforehand. 1. Press the POWER button to turn off the projector and set it into standby condition, and disconnect the power cord place. Insert the catch of the USB (LAN) port cover into the groove of the projector cabinet, and then tighten the screw to secure the port cover. WIRELESS To remove the - NEC NP-M311X | Users Manual - Page 123
Unit PC with wireless LAN card inserted PC with built-in wireless LAN function To enable direct communication (i.e., peer-to-peer) between personal computers and projectors, you need to select the Ad Hoc mode. Use the HTTP server function to make the settings. (→ page 41) 113 - NEC NP-M311X | Users Manual - Page 124
M311X/M271X/M271W; the time to clean the filters is set to [5000 H] at time of shipment on M361X/M311W. To cancel the message, press any button on the projector to the projector at the time of purchase as an example. After replacing with filters included in the optional lamp, replace the words - NEC NP-M311X | Users Manual - Page 125
Align the filter unit with the filter cover and push the six protrusions into place. • Make sure all six mounting points are aligned properly. 7. Put the filter unit back to the projector cabinet. Insert two catches of the tip of the filter unit into the groove of the cabinet, and push the - NEC NP-M311X | Users Manual - Page 126
• Clogged vents may cause a rise in the internal temperature of the projector, resulting in malfunction. • Do not scratch or hit the cabinet with or any hard objects • Contact your dealer for cleaning the inside of the projector. NOTE: Do not apply volatile agent such as insecticide on the cabinet, - NEC NP-M311X | Users Manual - Page 127
before handling. • Use the specified lamp for safety and performance. To order the replacement lamp, specify your lamp type. Replacement lamp: NP15LP: M311X/M271X/M271W NP16LP: M361X/M311W The replacement lamp comes with filters. While the filters attached to the projector at the time of purchase - NEC NP-M311X | Users Manual - Page 128
To replace the lamp: 1. Remove the lamp cover. (1)Loosen the lamp cover screw • The lamp cover screw is not removable. (2)Push and slide the lamp cover off. 7. Maintenance 2. Remove the lamp housing. (1)Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a - NEC NP-M311X | Users Manual - Page 129
cover. • Be sure to tighten the screw. This completes the lamp replacement. Go on to the filter replacement. NOTE: When you continue to use the projector for another 100 hours after the lamp has reached the end of its life, the projector cannot turn on and the menu is not displayed. If this happens - NEC NP-M311X | Users Manual - Page 130
While the material of filters attached to the projector at the time of purchase is different from the material of filters included with the optional lamp, there is no difference in performance between these two types. Before replacing the filters, replace the lamp. (→ page 117) 1. Push the catch to - NEC NP-M311X | Users Manual - Page 131
place. • Make sure all six mounting points are aligned properly. 5. Put the filter unit back to the projector cabinet. Insert two catches of the filter replacement. Go on to the clearing lamp and filter hour meters. To clear the lamp usage hours and the filter usage hours: 1. Place the projector - NEC NP-M311X | Users Manual - Page 132
Red Steady light Red Green Projector Condition Normal - Lamp has reached its end of life. Lamp replace- Replace the lamp. ment message will be displayed. Lamp has been used beyond its limit. The projector Replace the lamp. will not turn on until the lamp is replaced. [ECO MODE] is set to - NEC NP-M311X | Users Manual - Page 133
projector for another 100 hours after the lamp has reached the end of its life. If so, replace the lamp. After replacing the lamp, reset the lamp hours used. (→ page 117) • The lamp is supported tically, horizontally or by the projector. (→ page 129) both • Adjust the computer image manually with - NEC NP-M311X | Users Manual - Page 134
NEC LCD screen when the projector display is in use. Each notebook PC has a different way of deactivate/reactivate the local LCD supported by your Mac and the projector projector with a MacBook, output may not be set to 1024 × 768 unless "mirroring" is off on your MacBook. Refer to owner's manual - NEC NP-M311X | Users Manual - Page 135
technical information about projector's performance. Optical Model Number LCD Panel Resolution*1 Lens Lamp Light Output*2*3 Contrast Ratio*3 (full white: full black) Image Size (Diagonal) Projection Distance (Min.-Max.) Projection Angle NP-M361X NP-M311X NP-M271X 0.63 inch LCD with Micro Lens - NEC NP-M311X | Users Manual - Page 136
Considerations Regulations NP-M361X NP-M311X NP-M271X Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear NP-M311W 13.4" (W) NP-M271W 6.39 lbs/2.9 kg For additional information visit: US : http://www.necdisplay.com/ Europe : http://www.nec-display-solutions.com/ Global : http://www.nec - NEC NP-M311X | Users Manual - Page 137
Cabinet Dimensions Unit: mm (inch) 8. Appendix 257 (10.1) 130 (5.1) 339 (13.4) 100 (3.9) Lens center 99 (3.9) Lens center 59.4 (2.34) 108 (4.3) 175 (6.9) 150 (5.9) 200 (7.9) Holes for ceiling mount 127 - NEC NP-M311X | Users Manual - Page 138
8. Appendix 4 Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 11 12 13 14 15 6 7 8 9 10 1 23 45 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RGB Signal (Analog) Red Green or Sync on Green Blue - NEC NP-M311X | Users Manual - Page 139
resolution on XGA model (M361X/M311X/M271X) *2 Native resolution on WXGA model (M311W/M271W) *3 The projector may fail to display these signals M311X/M271X: 1024 × 768 / M311W/ M271W: 1280 × 800) will be displayed with Advanced AccuBlend. • Sync on Green and Composite sync signals are not supported - NEC NP-M311X | Users Manual - Page 140
Send" together on both ends of the cable to simplify cable connection. NOTE 3: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps. 130 - NEC NP-M311X | Users Manual - Page 141
service personnel, check the following list to be sure repairs are needed also by referring to the "Troubleshooting" section in your user's manual. This checklist below will help us solve your problem Input source's resolution and frequency are supported by the projector. Image is too dark. Remains - NEC NP-M311X | Users Manual - Page 142
]] cycles Remote control model number: Projector PC Installation environment Screen size: inch Screen type: White matte Beads Polarization Wide angle High contrast Throw distance: feet/inch/m Orientation: Ceiling mount Desktop Power outlet connection: Connected - NEC NP-M311X | Users Manual - Page 143
on the marking plate (on the bottom of the product). To see a list of our TCO certified projectors and their TCO Certification (in English only), visit our website at http://www.nec-display.com/ap/en_projector/tco/index.html The TCO certification, designed by TCO Development, is an international - NEC NP-M311X | Users Manual - Page 144
States, Canada, and Mexico) Please take time to register your new projector. This will activate your limited parts and labor warranty and InstaCare service program. Visit our web site at www.necdisplay.com, click on support center/register product and submit your completed form online. Upon receipt - NEC NP-M311X | Users Manual - Page 145
© NEC Display Solutions, Ltd. 2012 7N951851
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
 |
 |
Portable Projector
M361X/M311X/M271X/
M311W/M271W
User’s Manual
The M361X and M271X are not distributed in North America.
Model No.
NP-M361X, NP-M311X, NP-M271X, NP-M311W, NP-M271W