NEC NP-UM330X User's Manual

NEC NP-UM330X Manual

Get NEC NP-UM330X PDF manuals and user guides View all NEC NP-UM330X manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP-UM330X manual content summary:

  • NEC NP-UM330X | User's Manual - Page 1
    Portable Projector UM330X/UM280X/ UM330W/UM280W User's Manual The UM280X and UM280W are not distributed in North America. Model No. NP-UM330X, NP-UM280X, NP-UM330W, NP-UM280W
  • NEC NP-UM330X | User's Manual - Page 2
    to change without notice. (3) Great care has been taken in the preparation of this user's manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters
  • NEC NP-UM330X | User's Manual - Page 3
    this manual carefully before using your NEC projector and keep the manual handy ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the provided. The information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, DO NOT
  • NEC NP-UM330X | User's Manual - Page 4
    specified by NEC Display Solutions of America, Inc. in this manual. Failure to please contact your supplier. Important Safeguards These safety instructions are to ensure the long life of your addition, the ceiling must be strong enough to support the projector and the installation must be in
  • NEC NP-UM330X | User's Manual - Page 5
    so can cause electrical shock or fire. If the projector gets wet, turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel. • Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire. - Do not use any power
  • NEC NP-UM330X | User's Manual - Page 6
    the projector does not operate normally when you follow the instructions described in this user's manual. - If the projector has been dropped or the cabinet • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged.
  • NEC NP-UM330X | User's Manual - Page 7
    dispose according to Local, State or Federal Laws. Lamp Replacement • Use the specified lamp for safety and performance. • To replace the lamp, follow all instructions provided on page 120. • Be sure to replace the lamp and filter when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE
  • NEC NP-UM330X | User's Manual - Page 8
    20 Adjusting the tilt (Tilt foot 21 Finely adjusting the vertical tilt 21 Adjusting the size [Digital Zoom 22  Correcting Keystone Distortion Manually 23 Adjusting with buttons on the cabinet 23 Adjusting with the remote control 24  Optimizing Computer Signal Automatically 25 Adjusting the
  • NEC NP-UM330X | User's Manual - Page 9
    Table of Contents Using Eco Mode [ECO MODE 29 Checking Energy-Saving Effect [CARBON METER 30 5 Preventing the Unauthorized Use of the Projector [SECURITY 31  Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool)...... 34  Operating Your Computer's Mouse Functions from
  • NEC NP-UM330X | User's Manual - Page 10
    the Projection Window 119 3 Cleaning the Cabinet 119 4 Replacing the Lamp and the Filters 120 8. Appendix...126  Troubleshooting...126 Indicator Messages 126 Common Problems & Solutions 127 If there is no picture, or the picture is not displayed correctly 128  Specifications...129  Cabinet
  • NEC NP-UM330X | User's Manual - Page 11
    Infomation (For North America: 7N8N3231) (For Other countries than North America: 7N8N3231 and 7N8N3241) • Quick Setup Guide (7N8N3251)/ (7N8N3261) NEC Projector CD-ROM User's manual (PDF) and the utility software (7N951861) For North America only Limited warranty For customers in Europe: You
  • NEC NP-UM330X | User's Manual - Page 12
    UM330X/UM330W: 6000 hours (up to 3000 hours in ECO MODE OFF) • Two HDMI inputs supports digital signals The two HDMI inputs provide HDCP compatible digital signals. The HDMI input also supports audio signal. • 16 W built-in speaker for an integrated audio solution Powerful 16 watt monaural speaker
  • NEC NP-UM330X | User's Manual - Page 13
    User Supportware) contained in the supplied CD-ROM The supplied NEC Projector includes four programs: Virtual Remote Tool, Image Express supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled from a computer or controller. About this user's manual
  • NEC NP-UM330X | User's Manual - Page 14
    security wires or chains up to 0.18 inch/4.6 mm in diameter. Built-in Security Slot ( )* Tilt Foot (→ page 21) * This security slot supports the MicroSaver® Security System. Terminal Panel Side of Projector Lamp Cover (→ page 121) Controls (→ page 7) Remote Sensor (→ page 10) Exhaust Vent AC
  • NEC NP-UM330X | User's Manual - Page 15
    Removing and Attaching the Cable Cover After finishing connections, attach the supplied cable cover to properly hide the cables. 1. Introduction CAUTION: • Be sure to tighten the screws after attaching the cable cover. Failure to do so may cause the cable cover to come off and fall, resulting in
  • NEC NP-UM330X | User's Manual - Page 16
    Attaching the cable cover 1. Align four tabs of the cable cover with grooves of the pro- jector and push the cable cover until you click it. NOTE: • Be careful not to get cables caught in between the cable cover and the projector. 2. Tighten the cable cover screws. • Be sure to tighten the screws.
  • NEC NP-UM330X | User's Manual - Page 17
    Top Features 57 9 10 6 3 1, 2 4 8 11 1. (POWER) Button (→ page 16, 26) 2. POWER Indicator (→ page 15, 16, 26, 126) 3. STATUS Indicator (→ page 126) 4. LAMP Indicator (→ page 120, 126) 5. ECO Button (→ page 29) 6. SOURCE Button (→ page 18) 7. AUTO ADJ. Button (→ page 25) 8. MENU Button (→ page
  • NEC NP-UM330X | User's Manual - Page 18
    Terminal Panel Features 13 12 5 11 3 4 1. Introduction 1 2 14 7 6 8 9 10 15 1. COMPUTER IN/ Component Input Connector (Mini D-Sub 15 Pin) (→ page 106, 110) 2. COMPUTER AUDIO IN Mini Jack (Stereo Mini) (→ page 106, 110) 3. HDMI 1 IN Connector (Type A) (→ page 106, 111) 4. HDMI 2 IN Connector (Type
  • NEC NP-UM330X | User's Manual - Page 19
     Part Names of the Remote Control 1. Introduction 1 3 7 2 5 4 8 6 10 11. VIEWER Button (→ page 18, 62) 12. NETWORK Button (→ page 18) 9 15 13. USB DISPLAY Button (→ page 18) 11 13 14. ID SET Button 14 12 (→ page 91) 17 16 15. Numeric Keypad Button/CLEAR Button 18 19 (→
  • NEC NP-UM330X | User's Manual - Page 20
    Battery Installation 1. Introduction 1 Press firmly and slide the battery cover off. 2 Install new batteries (AAA). Ensure that you have the batteries' polarity (+/−) aligned correctly. 3 Slip the cover back over the bat- teries until it snaps into place. Do not mix different types of batteries
  • NEC NP-UM330X | User's Manual - Page 21
    wall. (→ page 59) * "USB Display" and "GCT" functions are not supported by Mac. Name of software program PC Control Utility Pro 4 PC Control Utility Pro Lite does not support "Meeting Mode" in Image Express Utility 2.0 included with our other models. Download service For the update information
  • NEC NP-UM330X | User's Manual - Page 22
    Ultimate Windows Vista Enterprise Windows XP Home Edition (32-bit version) Service Pack 3 or later Windows XP Professional (32-bit version) Service Pack 3 or later • Windows power-saving function is not supported. • Windows 7/Windows Vista Pentium M 1.2 GHz equivalent or higher required Dual core
  • NEC NP-UM330X | User's Manual - Page 23
    TCP/IP Only wireless LAN units built into Mac are guaranteed to work with Image Express Utility Lite. "Easy Connection" supports only wireless LAN. VGA (640 × 480) or higher required XGA (1024 × 768) recommended (1024 × 768 - 1280 × 800 recommended for UM330W/UM280W) 16.70 million colors
  • NEC NP-UM330X | User's Manual - Page 24
    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen.  Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 15) Step 2 • Turning on the projector (→ page 16) Step 3 •
  • NEC NP-UM330X | User's Manual - Page 25
    2. Projecting an Image (Basic Operation)  Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see "6. Installation and Connections" on page 106. Connect
  • NEC NP-UM330X | User's Manual - Page 26
     Turning on the Projector 2. Projecting an Image (Basic Operation) • Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator will turn to blue and the projector will become ready to use. TIP: • When the message "Projector is locked!
  • NEC NP-UM330X | User's Manual - Page 27
    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 29 menu languages. To select a menu language, follow these steps: 1. Use the ,
  • NEC NP-UM330X | User's Manual - Page 28
    2. Projecting an Image (Basic Operation)  Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the SOURCE button once. The projector will search for the available input
  • NEC NP-UM330X | User's Manual - Page 29
    the vertical tilt [Tilt Foot] (→ page 21) Adjusting the size [Digital Zoom] (→ page 22) Correcting the keystone distortion [Keystone]* (→ page 23) * To perform keystone correction manually, see "6. Correcting Keystone Distortion Manually" on page 23. 19
  • NEC NP-UM330X | User's Manual - Page 30
    2. Projecting an Image (Basic Operation) Adjusting horizontal/vertical position The throw distance can affect the size and the height of the projected image. Before installing the projector, decide the throw distance according to "Setting Up the Screen and the Projector" (→ page 103, 104) It is
  • NEC NP-UM330X | User's Manual - Page 31
    Adjusting the tilt (Tilt foot) Adjusting the left and right tilt. 2. Projecting an Image (Basic Operation) 1. Remove the spacers. Rotate the tilt foot clockwise to loosen it (left and right). • The projector can be positioned with the spacers attached. Keep the spacer. 2. Rotate the tilt foot to
  • NEC NP-UM330X | User's Manual - Page 32
    2. Projecting an Image (Basic Operation) Adjusting the size [Digital Zoom] Use the remote control to finely adjust the size of the image. 1. Press the FOCUS/ZOOM button on the remote control. The DIGITAL ZOOM bar will be displayed. 2. Press the  or  button to finely zoom in or out. 3. After
  • NEC NP-UM330X | User's Manual - Page 33
    If the screen is tilted vertically, keystone distortion becomes large. To correct keystone distortion manually, proceed with the following steps to correct keystone distortion. NOTE: • The Keystone correction can cause an image to be slightly blurred because the correction is
  • NEC NP-UM330X | User's Manual - Page 34
    Adjusting with the remote control 1. Press the KEYSTONE button. The Keystone bar will be displayed. 2. Projecting an Image (Basic Operation) 2. Use the  or  button to correct the keystone distortion. Adjust so that the right and left sides are parallel. 3. Press the EXIT button. The Keystone
  • NEC NP-UM330X | User's Manual - Page 35
    or may not be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 82, 83)  Turning Up or Down Volume Sound level from the speaker or audio output can be adjusted. TIP: When no menus
  • NEC NP-UM330X | User's Manual - Page 36
     Turning off the Projector To turn off the projector: 2. Projecting an Image (Basic Operation) 1. First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control. The confirmation message will be displayed. 2. Secondly, press the ENTER button or press the (
  • NEC NP-UM330X | User's Manual - Page 37
     When Moving the Projector Preparation: Make sure that the projector is turned off. 1. Remove the cable cover. (→ page 5) 2. Projecting an Image (Basic Operation) 2. Unplug the power cord. 3. Disconnect any other cables. • Remove the USB memory or the wireless LAN Unit if it is inserted into the
  • NEC NP-UM330X | User's Manual - Page 38
    3. Convenient Features 1 Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. The projector's power-saving function will work 10 seconds after the image is turned off. As a result, the lamp
  • NEC NP-UM330X | User's Manual - Page 39
    2. Press the button. The area of the magnified image will be moved 3. Convenient Features 3. Press the D-ZOOM (−) button. Each time the D-ZOOM (−) button is pressed, the image is reduced. NOTE: • The image will be enlarged or reduced at the center of the screen. • Displaying the menu will cancel
  • NEC NP-UM330X | User's Manual - Page 40
    3. Convenient Features NOTE: • The [ECO MODE] can be changed by using the menu. Select [SETUP] → [GENERAL] → [ECO MODE]. • The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME]. • The projector is always in [NORMAL] for 90 seconds after the lamp is
  • NEC NP-UM330X | User's Manual - Page 41
    3. Convenient Features 5 Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is
  • NEC NP-UM330X | User's Manual - Page 42
    3. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER button
  • NEC NP-UM330X | User's Manual - Page 43
    To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 3. Convenient Features 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen
  • NEC NP-UM330X | User's Manual - Page 44
    ) Using the utility software "Virtual Remote Tool" included on the companion NEC Projector CD-ROM, Virtual Remote screen (or toolbar) can be displayed a LAN and a serial connection. USB connection is not supported by Virtual Remote Tool. • For update information on Virtual Remote Tool, visit our
  • NEC NP-UM330X | User's Manual - Page 45
    of colors: 256 colors or less TIP: • The projector's COMPUTER IN connector supports DDC/CI (Display Data Channel Command Interface). DDC/CI is a standard interface for may not be com- pleted. 1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The menu window will be displayed. 35
  • NEC NP-UM330X | User's Manual - Page 46
    . Read "END USER LICENSE AGREEMENT" carefully. 4 If you agree, click "I accept the terms in the license agreement" and then click "Next". • Follow the instructions on the installer screens to complete the installation. • When the installation is complete, you will return to the menu window. 36
  • NEC NP-UM330X | User's Manual - Page 47
    Programs". The Add / Remove Programs window will be displayed. 3 Click Virtual Remote Tool from the list and then click "Remove". Follow the instructions on the screens to complete the uninstallation. Step 2: Connect the projector to the computer 1 Use the supplied computer cable (VGA) to connect
  • NEC NP-UM330X | User's Manual - Page 48
    Start menu • Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool] → [Virtual Remote Tool]. When for the first time, "Easy Setup" window will be displayed. Follow the instructions on the screens When "Easy Setup" is completed, the Virtual Remote Tool
  • NEC NP-UM330X | User's Manual - Page 49
    2. Click "Help". The Help screen will be displayed. • Displaying the help file using the Start Menu. 1. Click "Start" → "All programs" or "Programs" → "NEC Projector User Supportware" → "Virtual Remote Tool" → and then "Virtual Remote Tool Help" in this order. The Help screen will be displayed. 39
  • NEC NP-UM330X | User's Manual - Page 50
    USB cable to connect the projector and the computer will also start USB Display function. USB cable (not supplied) NOTE: • A USB cable must support the USB 2.0 Specifications. • The mouse function can be used with the following operating systems: Windows 7, Windows XP, or Windows Vista • In SP2 or
  • NEC NP-UM330X | User's Manual - Page 51
    on Windows XP, the Windows user account must have "Administrator" privilege. • USB Display uses functions of Image Express Utility Lite contained on NEC Projector CD-ROM (→ page 54). Starting USB Display, however, will not install Image Express Utility Lite on your computer. This is because
  • NEC NP-UM330X | User's Manual - Page 52
    5. Operate the control window. (6) (1) (2) (3) (4) (5) 3. Convenient Features (1) (Source Selects an input source of the projector. (2) (Picture Turns on or off AV-MUTE (Picture mute), and turns on or off FREEZE (Freeze a picture). (3) (Sound Turns on or off AV-MUTE (Sound mute), play the
  • NEC NP-UM330X | User's Manual - Page 53
    to the projector and enter the following URL : http://
  • NEC NP-UM330X | User's Manual - Page 54
    of the computer being used. Example 1: W hen the host name of the projector has been set to "pj.nec.co.jp", access is gained to the network setting by specifying http://pj.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: W hen the IP address
  • NEC NP-UM330X | User's Manual - Page 55
    3. Convenient Features PICTURE: Controls the video adjustment of the projector. BRIGHTNESS Increases the brightness adjustment value. BRIGHTNESS Decreases the brightness adjustment value. CONTRAST Increases the contrast adjustment value. CONTRAST Decreases the contrast adjustment value. COLOR
  • NEC NP-UM330X | User's Manual - Page 56
    NETWORK SETTINGS 3. Convenient Features • SETTINGS WIRED or WIRELESS SETTING APPLY DHCP ON DHCP OFF IP ADDRESS SUBNET MASK GATEWAY AUTO DNS ON AUTO DNS OFF Set for wired LAN or for wireless LAN. Apply your settings to wired LAN or wireless LAN. Automatically assign IP address, subnet mask, and
  • NEC NP-UM330X | User's Manual - Page 57
    NETWORK TYPE SECURITY TYPE INDEX KEY • NAME PROJECTOR NAME HOST NAME DOMAIN NAME 3. Convenient Features Select communication method when using wireless LAN. INFRASTRUCTURE: Select this option when communicating with one or more equipment connected to the wireless LAN network via a wireless access
  • NEC NP-UM330X | User's Manual - Page 58
    replace the lamp and filters. Projector Name: NEC Projector Lamp Hours Used: 100 [H] SENDER'S ADDRESS to reflect the above settings. • NETWORK SERVICE PJLink PASSWORD HTTP PASSWORD AMX BEACON Set CRESTRON ROOMVIEW compatibility The projector supports CRESTRON ROOMVIEW, allowing multiple devices
  • NEC NP-UM330X | User's Manual - Page 59
    • ROOMVIEW for managing from the computer. DISABLE Disables ROOMVIEW. ENABLE Enables ROOMVIEW. 3. Convenient Features • CRESTRON CONTROL for managing from the controller. DISABLE Disables CRESTRON CONTROL. ENABLE Enables CRESTRON CONTROL. IP ADDRESS Set your IP address of CRESTRON SERVER
  • NEC NP-UM330X | User's Manual - Page 60
    (PC Control Utility Pro 4/ Pro 5) Using the utility software "PC Control Utility Pro 4" and "PC Control Utility Pro 5" included on the companion NEC Projector CD-ROM, the projector can be controlled from a computer over a LAN. PC Control Utility Pro 4 is a program compatible with Windows. (→ this
  • NEC NP-UM330X | User's Manual - Page 61
    USER LICENSE AGREEMENT" carefully. 4 If you agree, click "I accept the terms in the license agreement" and then click "Next". • Follow the instructions on the installer screens to complete the installation. • When the installation is complete, you will return to the menu window. TIP: • Uninstalling
  • NEC NP-UM330X | User's Manual - Page 62
    to a LAN. Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 112), "Connecting to PC Control Utility Pro 4 Click "Start" → "All programs" or "Programs" → "NEC Projector User Supportware" → "PC Control Utility Pro 4" → "PC Control Utility Pro 4".
  • NEC NP-UM330X | User's Manual - Page 63
    Install PC Control Utility Pro 5 on the computer 1. Insert the accompanying NEC Projector CD-ROM in your Mac CD-ROM drive. The CD-ROM Connect the projector to a LAN Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 112), "Connecting to a Wireless
  • NEC NP-UM330X | User's Manual - Page 64
     Projecting Your Computer's Screen Image from the Projector over a LAN (Image Express Utility Lite) Using Image Express Utility Lite contained on the supplied NEC Projector CD-ROM allows you to send the computer's screen image to the projector over a USB cable or a wired or wireless LAN. Image
  • NEC NP-UM330X | User's Manual - Page 65
    agree, click "I agree." and then click "Next". • Follow the instructions on the installer screens to complete the installation. • When the installation Lite. 1. On Windows, click "Start" → "All programs" → "NEC Projector UserSupportware" → "Image Express Utility Lite" → "Image Express Utility Lite
  • NEC NP-UM330X | User's Manual - Page 66
    " → "Help" on the edit window. The Help screen will be displayed. • Displaying the help file using the Start Menu. Click "Start" → "All programs" or "Programs" → "NEC Projector User Supportware" → "Image Express Utility Lite" → "Image Express Utility Lite Help". The Help screen will be displayed. 56
  • NEC NP-UM330X | User's Manual - Page 67
    it is copied beforehand. This will eliminate the trouble of installing Image Express Utility Lite to your the "IEU_Lite (removable-media)" folder in the supplied NEC Projector CD-ROM to the root directory of your removable supported when Image Express Utility Lite is started from removable media. 57
  • NEC NP-UM330X | User's Manual - Page 68
    Express Utility Lite for Mac OS on the computer 1. Insert the accompanying NEC Projector CD-ROM in your Mac CD-ROM drive. The CD-ROM Connect the projector to a LAN Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 112), "Connecting to a Wireless
  • NEC NP-UM330X | User's Manual - Page 69
    3. Convenient Features  Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite) The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected even from an angle. What you can do with GCT • The GCT feature includes the following
  • NEC NP-UM330X | User's Manual - Page 70
    3. Use the mouse to click the [ • ] mark of which corner you wish to move. The currently selected [ • ] mark will turn red. 3. Convenient Features (In the above example, Windows screens are omitted for clarification.) 4. Drag the selected [ • ] mark to the point you wish to correct and drop it. •
  • NEC NP-UM330X | User's Manual - Page 71
    your microphone voice. Microphone sensitivity can be adjusted. From the menu, select [SETUP] → [INSTALLATION] → [MIC GAIN]. (→ page 92) NOTE: • The MIC input jack does not support plugin power microphones. • If there is no signal when either HDMI input is selected, sound output may not work. 61
  • NEC NP-UM330X | User's Manual - Page 72
    is available, presentations can be conducted simply with the projector. • Supported graphic format is JPEG. • The Viewer displays the thumbnail screen ( wish to project. • There are two ways of playback for slideshow: manual playback and auto playback. The interval time can be changed in auto
  • NEC NP-UM330X | User's Manual - Page 73
    computer, refer to the document or help file that comes with your Windows. - We do not warrant that the USB port of the projector will support all USB memories in the market. • Supported images - Supported file format for Viewer are as follows. We do not warrant all the images are
  • NEC NP-UM330X | User's Manual - Page 74
    4. Using the Viewer ❷ Projecting images stored in a USB memory device This section explains the basic operation of the Viewer. The explanation provides the operational procedure when the Viewer toolbar (→ page 68) is set to the factory default. - Starting the Viewer below - Removing the USB memory
  • NEC NP-UM330X | User's Manual - Page 75
    4. Press the ENTER button. The thumbnail screen will be displayed. (→ page 67) 5. Use the ▲▼◀ or ▶ button to select an icon. • The → (arrow) symbol on the right indicates there are more pages. pressing the PAGE ▽ (page down) button will show the next page: pressing the PAGE △ (page up) will show the
  • NEC NP-UM330X | User's Manual - Page 76
    Removing the USB memory from the projector 1. Select the VIEWER start screen. Press the EXIT button with no menu displayed. 2. Remove the USB memory from the projector. Make sure that the LED on the USB memory is not flashing before removing the USB memory. NOTE: If you remove the USB memory from
  • NEC NP-UM330X | User's Manual - Page 77
    directly. This toolbar is used in the thumbnail screen. Pressing the MENU button will display this toolbar. (→ page 68) This screen is used for manual playback. The selected image will be displayed in full screen. This toolbar is used in the slide screen. Pressing the MENU button will display this
  • NEC NP-UM330X | User's Manual - Page 78
    Using the toolbar 4. Using the Viewer 1. Press the MENU button. The toolbar will be displayed. The SOURCE screen will be displayed as Viewer connection screen. 2. Use the ◀ or ▶ button to select an item and use the ▲ or ▼ button to select its available option. When the cursor is placed, the
  • NEC NP-UM330X | User's Manual - Page 79
    Slide toolbar 4. Using the Viewer (1) (2) (3) (4) Menu (1) Display (2) Image display (3) Clockwise rotation (4) Counterclockwise rotation Options - Description Closes the menu and switches to the slide screen. Closes the menu and displays the thumbnail screen. Closes the menu and starts
  • NEC NP-UM330X | User's Manual - Page 80
    created where JPEG files will be saved to. The projector's Viewer does not support index file (with extension .idx). Install Viewer PPT Converter 3.0 on the is running, the installation may not be completed. 1. Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The menu window will
  • NEC NP-UM330X | User's Manual - Page 81
    terms in the license agreement" and then click "Next". • Follow the instructions on the installer screens to complete the installation. • When the installation is . • Starting Click Window's [Start] → [All Programs] → [NEC Projector User Supportware] → [Viewer PPT Converter 3.0] → [Viewer PPT
  • NEC NP-UM330X | User's Manual - Page 82
    to a USB memory 1. Insert the USB memory into the USB port of the computer. 2. On Windows, click "Start" → "All programs" → "NEC Projector UserSupportware" → "Viewer PPT Converter 3.0" → "Viewer PPT Converter 3.0". Viewer PPT Converter 3.0 will start. 3. Click "Brows..." and select a PowerPoint file
  • NEC NP-UM330X | User's Manual - Page 83
    5. Using On-Screen Menu  Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT in the bottom show
  • NEC NP-UM330X | User's Manual - Page 84
    2 Menu Elements Tab Available buttons Source Highlight 5. Using On-Screen Menu Slide bar Solid triangle Radio button Wireless symbol ECO mode symbol High Altitude symbol Thermometer symbol Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements
  • NEC NP-UM330X | User's Manual - Page 85
    5. Using On-Screen Menu 3 List of Menu Items Some menu items are not available depending on the input source. Menu Item SOURCE COMPUTER HDMI1 HDMI2 VIDEO S-VIDEO VIEWER NETWORK USB DISPLAY PRESET GENERAL Default REFERENCE * GAMMA CORRECTION*1 SCREEN SIZE*2 * COLOR TEMPERATURE *
  • NEC NP-UM330X | User's Manual - Page 86
    WIRED LAN SUBNET MASK GATEWAY MAC ADDRESS Default Options COLOR COLOR, MONOCHROME ON OFF, ON ON OFF, ON OFF OFF, ON AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BLUE BLUE, BLACK, LOGO UM330X/ UM330X/UM330W: OFF, 100[H], 500[H], 1000[H], 2000[H], UM330W: 3500(H) 3500
  • NEC NP-UM330X | User's Manual - Page 87
    Menu Item INFO. RESET IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS WIRELESS LAN SSID NETWORK TYPE WEP/WPA CHANNEL SIGNAL LEVEL VERSION FIRMWARE DATA PROJECTOR NAME MODEL NO. OTHERS SERIAL NUMBER LAN UNIT TYPE CONTROL ID (when [CONTROL ID] is set) CURRENT SIGNAL ALL DATA CLEAR LAMP
  • NEC NP-UM330X | User's Manual - Page 88
    5. Using On-Screen Menu 4 Menu Descriptions & Functions [SOURCE] COMPUTER Selects the computer connected to your COMPUTER input connector signal. NOTE: When the component input signal is connected to the COMPUTER IN connector, select [COMPUTER]. HDMI1 and 2 Selects the HDMI compatible equipment
  • NEC NP-UM330X | User's Manual - Page 89
    5. Using On-Screen Menu 5 Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are seven factory presets optimized for various types of images. You can
  • NEC NP-UM330X | User's Manual - Page 90
    5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT Recommended for
  • NEC NP-UM330X | User's Manual - Page 91
    Enhancing the Color [COLOR ENHANCEMENT] This function allows you to enhance the color of image. OFF Does not enhance the color ON Enhances the color. 5. Using On-Screen Menu NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE]. Adjusting White Balance [WHITE BALANCE
  • NEC NP-UM330X | User's Manual - Page 92
    [IMAGE OPTIONS] 5. Using On-Screen Menu Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function
  • NEC NP-UM330X | User's Manual - Page 93
    Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. 5. Using On-Screen Menu NOTE: The [HORIZONTAL] and [VERTICAL] items are not available for VIDEO, S-VIDEO, HDMI, VIEWER, NETWORK, and USB DISPLAY. - An image can be distorted during
  • NEC NP-UM330X | User's Manual - Page 94
    the incoming signal and displays it in its appropriate aspect ratio. • This table shows typical resolutions and aspect ratios that most computers support. Resolution VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 WXGA 1280 × 768 WXGA 1280 × 800 WXGA+ 1440 × 900 SXGA 1280 × 1024
  • NEC NP-UM330X | User's Manual - Page 95
    5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined UM330X/UM280X [Computer signal] Aspect ratio of incoming signal 4:3 5:4 16:9 15:9 16:10 Sample image when the appropriate aspect ratio is automatically determined [Video signal] Aspect ratio
  • NEC NP-UM330X | User's Manual - Page 96
    to the screen. To fine adjust the zoom, use the [DIGITAL ZOOM] function. (→ page 22) Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 23) TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for
  • NEC NP-UM330X | User's Manual - Page 97
    Using the Wall Color Correction [WALL COLOR] 5. Using On-Screen Menu This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces lamp brightness. Setting Eco Mode [ECO MODE] The ECO MODE increases lamp life,
  • NEC NP-UM330X | User's Manual - Page 98
    MINUTES] message will be displayed on the bottom of the screen. Selecting Menu Language [LANGUAGE] You can choose one of 29 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. [MENU] Selecting Menu Color [COLOR SELECT] You can choose
  • NEC NP-UM330X | User's Manual - Page 99
    option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the factory preset. Selecting a Color or Logo for Background [BACKGROUND] Use
  • NEC NP-UM330X | User's Manual - Page 100
    [INSTALLATION] 5. Using On-Screen Menu Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR
  • NEC NP-UM330X | User's Manual - Page 101
    CONTROL ID set- ting. NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.) • Your setting will not be affected even when [RESET
  • NEC NP-UM330X | User's Manual - Page 102
    cabinet. [OPTIONS(1)] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF The computer signal will not be
  • NEC NP-UM330X | User's Manual - Page 103
    is the case, select [COMPONENT]. [VIDEO & S-VIDEO System Select] This feature enables you to select composite video standards automatically or manually. Normally select [AUTO] and the projector will automatically detect the video standard. In the case where the projector has difficulty detecting the
  • NEC NP-UM330X | User's Manual - Page 104
    [OPTIONS(2)] 5. Using On-Screen Menu Selecting Power-saving in [STANDBY MODE] The projector has two standby modes: [NORMAL] and [POWER-SAVING]. The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than the NORMAL mode. The
  • NEC NP-UM330X | User's Manual - Page 105
    5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)] When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER IN input will power on the projector and simultaneously project the computer's image. This
  • NEC NP-UM330X | User's Manual - Page 106
    5. Using On-Screen Menu Setting up the Projector for a Wired LAN Connection [WIRED LAN] Important • Consult with your network administrator about these settings. • When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec- tor. (→ page 112) TIP:
  • NEC NP-UM330X | User's Manual - Page 107
    LAN connection will be turned off [EASY CONNECTION] Select [EASY CONNECTION] to execute a wireless LAN easily using Image Express Utility Lite on the supplied NEC Projector CD-ROM. [PROFILE 1] [PROFILE 2] Up to two settings for the USB wireless LAN unit can be stored in memory of the projector
  • NEC NP-UM330X | User's Manual - Page 108
    using the Image Express Utility Lite and connecting the PC and projector via a wireless LAN. The Image Express Utility Lite is contained on the supplied NEC Projector CD-ROM. To use [EASY CONNECTION], access the HTTP server function to display the web browser (→ page 43) and select [NETWORK SETTINGS
  • NEC NP-UM330X | User's Manual - Page 109
    5. Using On-Screen Menu 7 Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has six pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE
  • NEC NP-UM330X | User's Manual - Page 110
    [SOURCE] 5. Using On-Screen Menu [SOURCE NAME] [HORIZONTAL FREQUENCY] [SIGNAL TYPE] [SYNC TYPE] [SCAN TYPE] [WIRED LAN] [SOURCE INDEX] [VERTICAL FREQUENCY] [VIDEO TYPE] [SYNC POLARITY] [IP ADDRESS] [GATEWAY] [WIRELESS LAN] [SUBNET MASK] [MAC ADDRESS] [IP ADDRESS] [GATEWAY] [SSID] [WEP/WPA] [
  • NEC NP-UM330X | User's Manual - Page 111
    [VERSION] [FIRMWARE] Version [DATA] Version [OTHERS] [PROJECTOR NAME] [MODEL NO.] [SERIAL NUMBER] [LAN UNIT TYPE] [CONTROL ID] (when [CONTROL ID] is set) 5. Using On-Screen Menu 101
  • NEC NP-UM330X | User's Manual - Page 112
    5. Using On-Screen Menu 8 Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to
  • NEC NP-UM330X | User's Manual - Page 113
    6. Installation and Connections  Setting Up the Screen and the Projector [UM330X/UM280X] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 61.5" (1562 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen
  • NEC NP-UM330X | User's Manual - Page 114
    6. Installation and Connections [UM330W/UM280W] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 58" (1473 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen side of the projector and the wall or screen.
  • NEC NP-UM330X | User's Manual - Page 115
    the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. * Do not attempt to install the projector you to enjoy a much larger image when a smaller space is required. Contact your NEC dealer if you need a mirror system. If you're using a mirror system and
  • NEC NP-UM330X | User's Manual - Page 116
    keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. Connecting Your Computer NOTE: Signals supported by Plug & Play (DDC2) COMPUTER IN analog Yes INPUT HDMI 1 IN
  • NEC NP-UM330X | User's Manual - Page 117
    it is recommended to place that signal on the HDMI 1 IN connector. NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter
  • NEC NP-UM330X | User's Manual - Page 118
    Connecting an External Monitor Stereo mini-plug audio cable (not supplied) Computer cable (VGA) (not supplied) 6. Installation and Connections Computer cable (VGA) (supplied) Stereo mini-plug audio cable (not supplied) You can connect a separate, external monitor to your projector to
  • NEC NP-UM330X | User's Manual - Page 119
    S-VIDEO (S-VIDEO) NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs. NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements. NOTE: An image may not be displayed correctly when a Video or S-Video source is
  • NEC NP-UM330X | User's Manual - Page 120
    projector. Input connector COMPUTER IN SOURCE button on the projector cabinet COMPUTER Button on the remote control (COMPUTER 1) NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements. 110
  • NEC NP-UM330X | User's Manual - Page 121
    PC to the HDMI IN connector of your projector. NOTE: The HDMI IN connector supports Plug & Play (DDC2B). HDMI cable (not supplied) Use High Speed HDMI® Cable dark areas. For more information on settings, refer to the instruction manual of the audio video equipment to be connected. • When connecting
  • NEC NP-UM330X | User's Manual - Page 122
    6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [WIRED LAN]. (→ page 96). Example of LAN
  • NEC NP-UM330X | User's Manual - Page 123
    6. Installation and Connections Connecting to a Wireless LAN (Optional: NP02LM series) The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are required to assign an IP address to the projector. Important: • If you use the projector with the USB
  • NEC NP-UM330X | User's Manual - Page 124
    NOTE:When the cable cover is attached, remove it before inserting the USB Wireless LAN Unit. 1. Press the POWER button to turn off the projector and set it into standby condition, and disconnect the power cord. 2. Slowly insert the USB Wireless LAN Unit into the USB (WLAN) port. Remove the cap from
  • NEC NP-UM330X | User's Manual - Page 125
    Example of wireless LAN connection (Network Type → Infrastructure) PC with wireless LAN card inserted 6. Installation and Connections PC with built-in wireless LAN function USB Wireless LAN Unit Wireless access point Wired LAN Use the HTTP server function to make the settings. (→ page 43) Example
  • NEC NP-UM330X | User's Manual - Page 126
    7. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters, the projection window, the cabinet, and to replace the lamp and the filters.  Cleaning the Filters The air-filter sponge keeps dust and dirt from getting inside the projector and should
  • NEC NP-UM330X | User's Manual - Page 127
    3. Remove the four filters and use a vacuum cleaner to vacuum all the dust inside and outside. Get rid of dust in the sponge filter NOTE: • Whenever you vacuum the filter, use the soft brush attachment to vacuum. This is to avoid damage to the filter. • Do not wash the filter with water. Doing so
  • NEC NP-UM330X | User's Manual - Page 128
    6. Insert the large filter case into the projector cabinet. Make sure that the filter case is inserted in the correct orientation. 7. Maintenance 7. Put the small filter case to the projector cabinet. Make sure that the filter case is inserted in the correct orientation. 8. Put the filter cover
  • NEC NP-UM330X | User's Manual - Page 129
    7. Maintenance 2 Cleaning the Projection Window • Turn off the projector before cleaning. • Do not scratch or mar the projection window as it is made of glass. • Use a blower or lens paper to clean the projection window, and be careful not to scratch or mar the glass sur- face. 3 Cleaning the
  • NEC NP-UM330X | User's Manual - Page 130
    glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement. *NOTE: This message will be displayed under the following conditions: • for one minute after the projector has been powered on • when
  • NEC NP-UM330X | User's Manual - Page 131
    To replace the lamp: 1. Remove the lamp cover. (1)Loosen the lamp cover screw • The lamp cover screw is not removable. (2)Push and slide the lamp cover off. 7. Maintenance 2. Remove the lamp housing. (1)Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a
  • NEC NP-UM330X | User's Manual - Page 132
    3. Install a new lamp housing. (1)Insert a new lamp housing until the lamp housing is plugged into the socket. (2)Push the top center of the lamp housing to secure it. (3)Secure it in place with the two screws. • Be sure to tighten the screws. 7. Maintenance 4. Reattach the lamp cover. (1)Slide
  • NEC NP-UM330X | User's Manual - Page 133
    To replace the filters: 7. Maintenance NOTE: • Replace all four filters at the same time. • Before replacing the filters, wipe off dust and dirt from the projector cabinet. • The projector is precision equipment. Keep out dust and dirt during filter replacement. • Do not wash the filters with soap
  • NEC NP-UM330X | User's Manual - Page 134
    3. Remove the four filters and use a vacuum cleaner to vacuum all the dust inside and outside. Get rid of dust in the sponge filter NOTE: • Whenever you vacuum the filter, use the soft brush attachment to vacuum. This is to avoid damage to the filter. • Do not wash the filter with water. Doing so
  • NEC NP-UM330X | User's Manual - Page 135
    6. Insert the large filter case into the projector cabinet. Make sure that the filter case is inserted in the correct orientation. 7. Maintenance 7. Put the small filter case to the projector cabinet. Make sure that the filter case is inserted in the correct orientation. 8. Put the filter cover
  • NEC NP-UM330X | User's Manual - Page 136
    8. Appendix  Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indicator Condition Off Blinking light Blue 0.5 sec On, 0.5 sec Off 2.5 sec
  • NEC NP-UM330X | User's Manual - Page 137
    (→ "Power/Status/Lamp Indicator" on page 126.) Problem Check These Items Does not turn on or shut the resolution you are trying to display is supported tically, horizontally or by the projector. (→ page 133) both • Adjust the computer image manually with the Horizontal/Vertical in the [IMAGE
  • NEC NP-UM330X | User's Manual - Page 138
    Problem Check These Items Mic sound is not heard • Check if your microphone cable is connected to the MIC input jack correctly. • Check if you use a dynamic microphone. Plug in power microphones are not supported off. For example, NEC laptops use Fn . Refer to owner's manual supplied with your Mac
  • NEC NP-UM330X | User's Manual - Page 139
    Projection Angle NP-UM330X NP-UM280X 0.63 inch LCD with Micro Lens Array (Aspect Ratio 4:3) 1024 × 768 pixels (XGA) Digital zoom and manual focus Digital Zoom NP-UM330X NP-UM280X NP-UM330W NP-UM280W 1 × RGB/Component (D-Sub 15 P), 2 × HDMI Type A (19P, HDMI® Connector) HDCP supported*5,
  • NEC NP-UM330X | User's Manual - Page 140
    Model Number Installation Orientation Dimensions Weight Environmental Considerations Regulations NP-UM330X NP-UM280X NP-UM330W Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling .com/ Europe : http://www.nec-display-solutions.com/ Global : http://www.nec-display.com/global/index.html For
  • NEC NP-UM330X | User's Manual - Page 141
     Cabinet Dimensions Unit: mm (inch) 8. Appendix 112 (4.4) 344 (13.5) 424.5 (16.7) 428 (16.9) 378 (14.9) 114 (4.5) 10.5 (0.4) 165 (6.5) 114 (4.5) 43 (1.7) 163 (6.4) Attachment surface of ceiling mount 115 (4.5) 112.5 (4.4) 151.3 (6.0) 131
  • NEC NP-UM330X | User's Manual - Page 142
    8. Appendix 4 Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 11 12 13 14 15 6 7 8 9 10 1 23 45 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RGB Signal (Analog) Red Green or Sync on Green Blue Ground
  • NEC NP-UM330X | User's Manual - Page 143
    (UM330X/UM280X: 1024 × 768 / UM330W/ UM280W: 1280 × 800) will be displayed with Advanced AccuBlend. • Sync on Green and Composite sync signals are not supported. • Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh rate or
  • NEC NP-UM330X | User's Manual - Page 144
    6 PC Control Codes and Cable Connection PC Control Codes Function POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT VIDEO INPUT SELECT S-VIDEO INPUT SELECT VIEWER INPUT SELECT NETWORK INPUT SELECT USB DISPLAY PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON
  • NEC NP-UM330X | User's Manual - Page 145
    service personnel, check the following list to be sure repairs are needed also by referring to the "Troubleshooting" section in your user's manual. This checklist below will help us solve your problem contrast. Input source's resolution and frequency are supported by the projector. Image is too dark.
  • NEC NP-UM330X | User's Manual - Page 146
    In the space below please describe your problem in detail. 8. Appendix Information on application and environment Native resolution: Refresh rate: Video adapter: Other: DVD player Signal cable NEC standard or other manufacturer's cable? Model number: Length: inch/m Distribution
  • NEC NP-UM330X | User's Manual - Page 147
    product). To see a list of our TCO certified projectors and their TCO Certification (in English only), visit our website at http://www.nec-display.com/ap/en_projector/tco/index.html The TCO certification, designed by TCO Development, is an international environmental and ergonomics standard for IT
  • NEC NP-UM330X | User's Manual - Page 148
    .com, click on support center/register product and submit your completed form online. Upon receipt, we will send a confirmation letter with all the details you will need to take advantage of fast, reliable warranty and service programs from the industry leader, NEC Display Solutions of America
  • NEC NP-UM330X | User's Manual - Page 149
    © NEC Display Solutions, Ltd. 2012 7N951861
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
Portable Projector
UM330X/UM280X/
UM330W/UM280W
User’s Manual
The UM280X and UM280W are not distributed in North America.
Model No.
NP-UM330X, NP-UM280X, NP-UM330W, NP-UM280W