NEC e616 User Guide - Page 143
To Establish a Dialup Connection to a PC using an USB Cable, Do the following on the PC, Data exchange - file transfer software
View all NEC e616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
USB USB is a simple method of connecting your e616 to a PC through a cable to achieve fast data transfer rates. Connecting your e616 to a PC with a USB cable enables the PC to use the e616 just like a modem to establish a dial-up connection to an Internet service provider. When used in the '3G area', the USB connection may provide a much faster transfer rate than a standard modem. USB connection also enables data transfer between your e616 and a PC. Refer below, to Data Transfer for details. A USB connection can also be used to synchronise your Contacts, Calendar and To Do list between your e616 and PC. When using the USB cable for the first time, ensure the USB Drivers are installed. See the Software Manual on the CD-ROM for further instructions. Please check that your operator allows use of your e616 as a modem to connect to the internet. Please contact 3 for further details. To Establish a Dialup Connection to a PC using an USB Cable Do the following on the PC: Please ensure the e616 and the PC are connected via USB cable before proceeding. To 1 Add a new connection on PC 2 Dial 3 Start the Internet communication Do this Using Microsoft Dial-Up Networking, add a new connection ensuring the device used to make the connection is the 'NEC e616 Modem'. Also ensure that the telephone number to dial is set to *99# Note : This procedure only needs to be performed once. Connect using this dial-up connection After connection is made, start up and use the appropriate Internet application (browser, mailer, instant messenger, etc.) Data exchange The Data exchange functionality is used to permit the transfer of data files between the handset memory (internal or external memory stick) and a PC. Connections -126-