Netgear FWG114P FWG114P Reference Manual - Page 140
Connection, FWG114P
UPC - 606449029819
View all Netgear FWG114P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P Note: If the configuration settings on this screen are not available for editing, go to the Options menu, select Secure, and Specified Options to enable editing these settings. From the Edit menu of the Security Policy Editor, click Add, then Connection. A "New Connection" listing appears. Rename the "New Connection" to FWG114P. b. Ensure that the following settings are configured: - In the Connection Security box, Secure is selected. - In the Protocol menu, All is selected. - The Connect using Secure Gateway Tunnel check box is selected. c. In this example, select IP Subnet as the ID Type, 192.168.0.0 in the Subnet field (the Subnet address is the LAN IP Address of the FWG114P with 0 as the last number), and 255.255.255.0 in the Mask field, which is the LAN Subnet Mask of the FWG114P. d. In the ID Type menus, select Domain Name and Gateway IP Address. Enter FWG114P in the Domain Name field. In this example, 66.120.188.153 would be used for the Gateway IP Address, which is the static IP address for the FWG114P WAN port. 3. Configure the Connection Identity Settings. a. In the Network Security Policy list, click the My Identity subheading. Figure 8-27: My Identity In this example, select Domain Name as the ID Type, and enter VPNclient. Also, accept the default Internal Network IP Address of 0.0.0.0. Figure 8-28: My Identity Pre-Shared Key 8-40 March 2004, 202-10027-01 Virtual Private Networking