Netgear FWG114P FWG114P Reference Manual - Page 249

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P 2. Click the VPN Settings link on the left side of the Settings management GUI. Click the radio button of the first available VPN leg (all 8 links are available in the example). Click the Edit button below. This will take you to the VPN Settings - Main Mode Menu. Figure G-3: Figure 3 - NETGEAR FVS318 VPN Settings (part 1) - Main Mode - In the Connection Name box, enter in a unique name for the VPN tunnel to be configured between the NETGEAR devices. For this example we have used toFVS328. - Enter a Local IPSec Identifier name for the NETGEAR FVS318 Gateway A. This name must be entered in the other endpoint as Remote IPSec Identifier. In this example we used 14.15.16.17 as the local identifier. - Enter a Remote IPSec Identifier name for the remote NETGEAR FWG114P Gateway B. This name must be entered in the other endpoint as Local IPSec Identifier. In this example we used 22.23.24.25 as the remote identifier. - Choose a subnet from local address from the "Tunnel can be accessed from" pull-down menu. - Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Local IP Local LAN start IP Address field. - Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Local IP Local LAN finish IP Address field. - Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Local LAN IP Subnetmask field. NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P G-3 March 2004, 202-10027-01