Netgear FWG114P FWG114P Reference Manual - Page 150

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P The Router Status screen shows the following parameters: Table 9-1. Status Fields Field System Name Firmware Version Printer Status WAN Port MAC Address IP Address DHCP IP Subnet Mask Domain Name Server LAN Port MAC Address IP Address DHCP IP Subnet Mask Wireless Port Name (SSID) Region Channel/Frequency Mode Wireless AP Description The System Name assigned to the router. The router firmware version. The printer status. These parameters apply to the Internet (WAN) port of the router. This field displays the MAC address being used by the Internet (WAN) port of the router. This field displays the IP address being used by the Internet (WAN) port of the router. If no address is shown, the router cannot connect to the Internet. This field if the WAN port DHCP settings are dynamic or static. This field displays the IP Subnet Mask being used by the Internet (WAN) port of the router. Identifies the IP address of the DNS server(s). The Media Access Control address being used by the LAN port of the router. The IP address being used by the Local (LAN) port of the router. The default is 192.168.0.1. Identifies if the router's built-in DHCP server is active for the LAN attached devices. The IP Subnet Mask being used by the Local (LAN) port of the router. The default is 255.255.255.0. This field displays the wireless network name (SSID) being used by the wireless port of the router. The default is Wireless. This field displays the MAC address being used by the wireless port of the router. Identifies the channel the wireless port is using. See "Wireless Channels" on page E-7 for the frequencies used on each channel. Identifies if the channel the wireless port is set for 802.11b, 802.11g, or both. Identifies if the wireless access point is on or off. 9-2 Maintenance March 2004, 202-10027-01