Netgear FWG114P FWG114P Reference Manual - Page 54

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P Before You Change the SSID and WEP Settings Take the following steps: For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. Wireless is the default FWG114P SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below. Note: The SSID in the wireless firewall/print server is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID: • Authentication Circle one: Open System or Shared Key. Choose "Shared Key" for more security. Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key as well and have the same keys in the same positions as those in the FWG114P. • WEP Encryption Keys For all four 802.11b keys, choose the Key Size. Circle one: 64 or 128 bits Key 1 Key 2 Key 3 Key 4 • WPA-PSK (Pre-Shared Key) Record the WPA-PSK key: Key • WPA RADIUS Settings For WPA, record the following RADIUS settings: Server Name/IP Address: Primary Secondary Port Shared Key Use the procedures described in the following sections to configure the FWG114P. Store this information in a safe place. 4-8 Wireless Configuration March 2004, 202-10027-01