Netgear GA622T GA622T Reference Manual - Page 23
Table 3-1., Parameter Descriptions - network adapter
UPC - 606449021561
View all Netgear GA622T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Table 3-1. Parameter Descriptions Property Description IEEE Compliance Enable Disabled is used for non-compliant switches. Enabled requires that the attached network devices fully complies with 802.3ab. Interrupt Hold Off Time Specifies the amount of time between adapter interrupts. Under normal operation, the adapter generates an interrupt every time a frame is received. Reducing the number of interrupts improves CPU utilization. Jumbo Frame Size Enables sending larger Ethernet packets on Gigabit. Jumbo Frames can increase throughput and decrease CPU utilization by putting more data in each packet, thereby sending out fewer packets. Jumbo Frames are not a part of the IEEE standard and can be used only if supported by the other network equipment. Network Address Allows you to change the network address. Network Media Duplex is a performance option that lets you choose how the card transmits and receives packets over the network. Offload Rx IP Checksum When enabled, this option allows the card to verify the IP checksum of incoming packets.This will improve IP receive performance by offloading this operation from the CPU. (Windows 2000, Me) Offload Rx TCP Checksum When enabled, this option allows the card to verify the TCP checksum of incoming packets. This will improve TCP receive performance by offloading this operation from the CPU. (Windows 2000, Me) Offload Rx UDP Checksum When enabled, this option allows the card to verify the UDP checksum of incoming packets.This will improve UDP receive performance by offloading this operation from the CPU. (Windows 2000, Me) Offload Tx IP Checksum When enabled, this option allows the card to compute the IP checksum of outgoing packets.This will improve IP transmit performance by offloading this operation from the CPU. (Windows 2000, Me) Offload Tx TCP Checksum When enabled, this option allows the card to compute the TCP checksum of outgoing packets. This will improve TCP transmit performance by offloading this operation from the CPU. (Windows 2000, Me) Offload Tx UDP Checksum When enabled, this option allows the card to compute the UDP checksum of outgoing packets.This will improve UDP transmit performance by offloading this operation from the CPU. (Windows 2000, Me) Windows 95OSR2/98/Me driver software 3-6