Netgear GA622T GA622T Reference Manual - Page 42
GA622T Copper Gigabit Ethernet Adapter Driver and Document CD, GA622T Copper Gigabit Ethernet
UPC - 606449021561
View all Netgear GA622T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Pre-Installation Requirements Before you can use the Gigabit Ethernet card in your NetWare system, you must install the network device driver. First, make sure that the Gigabit Ethernet card is physically installed on your system. Typically, NetWare OS software must already be running on the server. Make sure that your server meets the hardware and operating system software requirements described in Table 2-1, which starts on page 2-2. Install the NIC into a PCI slot of a NetWare server and note the slot number (slots are generally numbered top/front to bottom/back of the machine). You may need to know the slot number later, when you configure the driver. Install the latest support pack files to ensure the GA622T Copper Gigabit Ethernet Card will correctly function.The Support pack or patch file(s) needed for the operating system running on your server are indicated in Table 6-2. Table 6-2. NetWare Support Files NetWare O/S File Name Version 5.0/5.1 Support Pack 4 (or the latest support pack) Version 4.2 Support Pack 8 (or the latest support pack) File(s) to Install NW5SP4.EXE (or latest file) NW4SP8A.EXE (or latest file) Installing the Driver Software To use the floppy drive to install the drivers, copy the Ga622.lan and Ga622.ldi files from the GA622T Copper Gigabit Ethernet Adapter Driver and Document CD onto a floppy disk. Insert the GA622T Copper Gigabit Ethernet Adapter Driver and Documentation CD into the CD-ROM drive. NetWare driver software 6-2