Netgear GSM7224v1 GSM7212 Hardware manual - Page 11
GSM7224 Front Panel and LEDs, contains LEDs, RJ-45 jacks, and SFP module bays.
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Managed Layer 2 Switches GSM7212, GSM7224, and GSM7248 Hardware Installation Guide GSM7224 Front Panel and LEDs The following figure shows the front panel of the GSM7224. The front panel contains LEDs, RJ-45 jacks, and SFP module bays. LEDs RJ-45 jacks SFP module bays Console port Figure 2-3 The following table shows the GSM7224 LEDs on the front of the switch. Table 2-2. GSM7224 LED Description LED Description Power • Green: Power is supplied, and the switch is operating normally. • Yellow: Power supply present, but it has failed. • Off: Power is disconnected. 10/100/1000 ports (two LEDs) Speed (right) • Green: Link in 1000 Mbps. • Yellow: Link in 100 Mbps. • Off: Link in 10 Mbps. Link/ACT (left) • Green: Link is up. • Blinking green: The port is sending or receiving packets. • Off: No link is detected. SFP port (1,000 Mbps only) • Solid green: Link is up. • Blinking green: The port is sending or receiving packets in link up status. • Off: No link is detected. Introduction 2-3 v1.0, March 2006