Netgear GSM7224v1 GSM7212 Hardware manual - Page 12
GSM7224 Rear Panel, GSM7248 Front Panel and LEDs
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Managed Layer 2 Switches GSM7212, GSM7224, and GSM7248 Hardware Installation Guide GSM7224 Rear Panel The rear panel has a standard AC power receptacle for the supplied power cord. Power receptacle Figure 2-4 GSM7248 Front Panel and LEDs The following figure shows the front panel of the GSM7248. The front panel contains LEDs, RJ-45 jacks, SFP module bays, and a console port. LEDs Figure 2-5 RJ-45 jacks SFP module bays Console port The following table describes the GSM7248 LEDs on the front of the switch. Table 2-3. GSM7248 LED Description LED Power Description • Green: Power is supplied, and the switch is operating normally. • Off: No power is applied, or power failure. 2-4 Introduction v1.0, March 2006
Managed Layer 2 Switches GSM7212, GSM7224, and GSM7248 Hardware Installation Guide
2-4
Introduction
v1.0, March 2006
GSM7224 Rear Panel
The rear panel has a standard AC power receptacle for the supplied power cord.
GSM7248
Front
P
anel
and LEDs
The following figure shows the front panel of the GSM7248. The front panel
contains LEDs, RJ-45 jacks, SFP module bays, and a console port.
The following table describes the GSM7248 LEDs on the front of the switch.
Figure 2-4
Figure 2-5
Table 2-3.
GSM7248 LED Description
LED
Description
Power
•
Green:
Power is supplied, and the switch is operating normally.
•
Off:
No power is applied, or power failure.
Power receptacle
SFP
RJ-45 jacks
LEDs
module
bays
Console
port