Netgear GSM7312 FSM7326P User Manual - Page 41

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver- The port identifies the specific physical port or logical interface being managed on a given slot. Table 2-4. Type of Ports Port Type Description Physical Ports Logical Interfaces CPU ports The physical ports for each slot are numbered sequentially starting from zero. Port-channel or Link Aggregation Group (LAG) interfaces are logical interfaces that are only used for bridging functions. VLAN routing interfaces are only used for routing functions. CPU ports are handled by the driver as one or more physical entities located on physical slots. 2.2.4 Using the "No" Form of a Command The no keyword is a specific form of an existing command and does not represent a new or distinct command. Almost every configuration command has a no form. In general, use the no form to reverse the action of a command or reset a value back to the default. For example, the no shutdown configuration command reverses the shutdown of an interface. Use the command without the keyword no to re-enable a disabled feature or to enable a feature that is disabled by default. Only the configuration commands are available in the no form. 2.2.5 Command Modes The CLI groups commands into modes according to the command function. Each of the command modes supports specific 7300 Series Managed Switch software commands. The commands in one mode are not available until you switch to that particular mode, with the exception of the User EXEC mode commands. You can execute the User EXEC mode commands in the Privileged EXEC mode. Overview 2-5 v1.0, December 2005