Netgear GSM7352SNA GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid
Netgear GSM7352SNA - Prosafe 48 Port Gigabit L3 Managed Stackable Switch Manual
UPC - 606449043013
View all Netgear GSM7352SNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GSM7352SNA manual content summary:
- Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 1
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guide NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10255-01 February 2007 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 2
) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. It is hereby certified that the NETGEAR ProSafe™ 24-Port 10/100/1000 L3 managed Stackable Switch with 4 10 Gigabit I/O Slots GSM7328S has been suppressed in - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 3
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there CISPR 22). EN 55 022 and EN 55 024 Statements This is to certify that the NETGEAR ProSafe™ 48-Port 10/100/1000 L3 managed Stackable Switch with 4 10 Gigabit I/ O - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 4
, in which case the user may be required to take appropriate measures. Customer Support Refer to the Support Information Card that shipped with your Managed Stackable Layer 3 Fast Ethernet Switch. World Wide Web NETGEAR maintains a World Wide Web home page that you can access at the universal - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 5
1-2 How to Print this Manual 1-3 Revision History ...1-4 Chapter 2 Introduction GSM7328S Front Panel and LEDs 2-1 GSM7328S Rear Panel 2-4 GSM7352S Front Panel and LEDs 2-4 GSM7352S Rear Panel 2-6 GSM7328FS Front Panel and LEDs 2-7 GSM7328FS Rear Panel 2-9 Safety Instructions ...2-10 Chapter - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 6
Connecting Equipment to the Switch 3-10 RJ-45 Ports ...3-10 Connecting a Console to the Switch 3-11 Chapter 4 Troubleshooting Troubleshooting Chart 4-1 Additional Troubleshooting Suggestions 4-2 Appendix A Technical Specifications Appendix B Default Configuration Settings vi v1.0, February 2007 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 7
Conventions Italics Bold Fixed Emphasis, books, CDs, URL names User input Screen text, file and server names, extensions, commands, IP addresses This guide uses the following formats to highlight special messages: Note: This format is used to highlight information of importance or special - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 8
Slots GSM7328FS February 2007 Note: Product updates are available on the NETGEAR, Inc. Web site at http://kbserver.netgear.com/downloads_support.asp. How to Use This Manual The HTML version of this manual includes the following: • Buttons, and , for browsing forwards or backwards through - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 9
of any page. • Click the Complete PDF Manual link at the top left of any page in the manual. The PDF version of the complete manual opens in a browser window. • Click the print icon in the upper left of your browser window. Tip: If your printer supports printing two pages on a single sheet of - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 10
Part Number Version Publication Date Description 201-10813-01 1.0 202-10255-01 1.0 March 2006 February 2007 Document Created. Added description of GSM7328FS switch. 1-4 About This Manual v1.0, February 2007 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 11
increase productivity. This guide describes hardware installation and basic troubleshooting for the following NETGEAR switches: • ProSafe™ . The module bays support any combination of either the ProSafe 24-Gigabit Stackable Module (AX742) or the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741). See " - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 12
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal1 LEDs RST RJ-45 jacks (reset button) Copper/fiber combo ports Stacking/XFP module bays Figure 2-1 The following table describes the LEDs on the front panel of the switch. Table 2-1. LED Descriptions for - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 13
M3, M4 High-Speed I/O Modules (1 LED per module) XFP Module present or Stacking Adapter present and ACT LED: XFP Module present LED /ACT • Off: The 10GbE Adapter is not present. • Solid green: The 10GbE Adapter is present. • Blinking green: Packets transmission or reception is occurring on the port - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 14
power supply connector, and a standard AC power receptacle for the supplied power cord. The module bays support any combination of either the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741) or the ProSafe 24-Gigabit Stackable Module (AX742). Power receptacle Figure 2-2 Stacking/XFP module bays - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 15
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- The table below describes the GSM7352S LEDs on the front of the switch. Table 2-2. GSM7352S LED Description LED Description ID This is the stack member ID (1-8) that the software assigns to the switch. - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 16
supply connector, a console port, and a standard AC power receptacle for the supplied power cord. The module bays support any combination of either the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741) or the ProSafe 24-Gigabit Stackable Module (AX742). See "High-Speed I/O Module Bays" in Chapter - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 17
RJ-45 jacks, copper/fiber combo ports, and two module bays. The module bays support any combination of either the ProSafe 24-Gigabit Stackable Module (AX742) or the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741). See "High-Speed I/O Module Bays" in Chapter 3. LEDs RST (reset button) Copper/fiber - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 18
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Table 2-3. LED Descriptions for GSM7328FS LED Description Power /Status LED • Solid Green: Power is supplied to the switch and it is operating normally • Solid Yellow: POST in progress Blinking Yellow: POST / - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 19
Blinking Yellow: RPS unit is present but the power has failed. • Off: NETGEAR RPS Bank Disconnected. GSM7328FS Rear Panel The rear panel has two module bays, a supplied power cord. The module bays support any combination of either the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741) or the ProSafe 24 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 20
GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Safety Instructions Use the following safety guidelines to ensure your . If the system gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider. • Do not push any objects into the openings of your - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 21
into properly grounded electrical outlets. • The peripheral power cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a three-wire cable with properly grounded plugs - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 22
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- 2-12 v1.0, February 2007 Introduction - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 23
Switch with preinstalled software • Power adapter cord • Rubber footpads for NETGEAR 7000 Series Managed Switch Administration Guide, the NETGEAR Installation Guide for the 7000 Series Stackable Managed Switch, and this Hardware Installation Guide • Warranty and Support Card • Installation Guide - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 24
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Protecting Against Electrostatic Discharge Warning: Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before you touch any of - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 25
that all items are present. See "Package Contents" on page 3-1. Note: If any item is found missing or damaged, contact your local NETGEAR reseller for replacement. 5. Inspect the products and accessories for damage. Report any damage immediately. Installation Install the equipment in the sequence - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 26
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Select a Location The switch can be mounted in a standard 19-inch (48.26-centimeter) rack, wallmounted, or left freestanding (placed on a tabletop). The site where you install the switch may greatly affect its - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 27
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Install the Switch You can install the switch on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads. Stick one rubber - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 28
appropriate outlet, follow these steps to apply AC power. 1. Connect one end of the AC power adapter cable to the rear of the switch, and the other end to a grounded 3-pronged AC good. For help with troubleshooting, see Chapter 4, "Troubleshooting". 3-6 Hardware Installation v1.0, February 2007 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 29
24-Gigabit Stackable Modules (AX742), and then use the remaining module bays for 10-Gigabit Ethernet XFP Adapters (AX741). The modules and adapters are sold separately. Note: If you want to support more than two 10-Gigabit Ethernet connections, any of the additional I/O module bays can be used with - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 30
1. High-Speed I/O Module Installation The High-Speed I/O Module Bays support ProSafe 10-Gigabit Ethernet XFP Adapter (AX741) or ProSafe 24-Gigabit Stackable Modules (AX742). AX741 adapter Figure 3-3 When the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741) is in place, you can insert a standard 10 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 31
Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Stacking You can connect up to eight switches to form a stack with a single management IP address. The switches automatically select a master unit. Once the master is selected, you can use its console to manage all the switches in - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 32
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Connecting a Redundant Power Supply Each switch has a redundant power supply (RPS) connector at the rear of the switch next to the power receptacle. Power receptacle Redundant power supply connector Figure 3-6 You - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 33
the switch and apply power, you can connect to it with a terminal or workstation. You can use the Command Line Interface (CLI) to identify the IP address. If you are stacking switches, see "Stacking" on page 3-9. To use a console you need the following items: • VT100/ANSI terminal, or a Windows PC - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 34
following documents are provided for this purpose: • Quick Installation Guide: Explains basic setup and configuration (provided as both a print document and in is located on the Resource CD. • NETGEAR 7000 Series Managed Switch Administration Guide: Describes configuration tasks, and is located on - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 35
lists symptoms, causes, and solutions of possible problems. Table 4-1. Troubleshooting Chart Problem Power LED is off. Link LED is off and comply with Ethernet specifications. See Appendix A. Check for a defective adapter card, cable, or port by testing it in an alternate environment where - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 36
4-1 do not resolve your problem, refer to the troubleshooting suggestions in this section. • Network Adapter Cards Make sure that the network adapter cards installed in the PCs are in working condition and the software driver has been installed. • Configuration: If problems occur after you change - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 37
1000BASE-SX 802.3z 1000BASE-LX 802.3ab 1000BASE-T 802.3ae 10000BASE-LR 802.3ae 10000BASE-SR 802.3x flow control • Port mirroring support • SNMP v1, v2c, v3 • RFC1757 RMON 1 groups 1, 2, 3, and 9 • RFC1213 MIB II • RFC1643 Ethernet Interface MIB • RFC1493 bridge MIB • RFC2131 DHCP client (and BootP - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 38
Protocol (MSTP) • 802.3ad Link Aggregation (LACP) • IGMP v1, v2 Snooping Support Layer 3 Services • VLAN routing • Port routing • RIP v1, v2 • OSPF v2 • VRRP 196 Gbps 144 Gbps Address 8K MAC addresses per system database size 10/100/1000 8MB embedded memory for Max support 0.75-MB buffer 8MB - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 39
-forward • Network latency: Less than 80 microseconds for 64-byte frames in store-and-forward mode for 10 Mbps to 100 Mbps transmission • Addressing: 48-bit MAC address • Acoustic noise: (ANSI-S10.12): 56.07 dB • Heat dissipation: 18.99 Btu/hr Power consumption 80 W maximum 100- 108 W maximum 100 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 40
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- A-4 Technical Specifications v1.0, February 2007 - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 41
Configuration Settings This appendix provides the default settings for the NETGEAR Model GSM7328S, GSM7352S, and GSM7328FS switches. Table B-1. VLAN All ports belong to default VLAN (VLAN 1) as untagged ports IP multicast filtering Disabled Spanning Tree Protocol Enabled (IEEE 802.1s) Admin - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 42
GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Table B-1. Default Configuration Settings (continued) Features IP routing RIP MAC address aging OSPF SNMP community DHCP Server VLAN Ingress filtering IP multicast filtering VRRP Default Setting Disabled Disabled 300 seconds Disabled public (read - Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 43
- Netgear GSM7352SNA | GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 44
NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA February 2007
202-10255-01
February 2007
NETGEAR
, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
Managed Stackable Layer 3
Switches GSM7328S,
GSM7352S and
GSM7328FS Hardware
Installation Guide