Netgear GSM7352SNA GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 12
Table 2-1. LED Descriptions for GSM7328S
UPC - 606449043013
View all Netgear GSM7352SNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal1 LEDs RST RJ-45 jacks (reset button) Copper/fiber combo ports Stacking/XFP module bays Figure 2-1 The following table describes the LEDs on the front panel of the switch. Table 2-1. LED Descriptions for GSM7328S LED Description ID This is the stack member ID (1-8) that the software assigns to the switch. Master • Green: Switch acts as a master unit in a stack of GSM7300S series switches. • Off: Switch acts as a slave unit in a stack of GSM7300S switches. RPS (redundant power supply) • Solid green: The redundant power supply is connected (and using internal power). • Solid yellow: The switch internal power has failed or been disconnected, but the redundant power supply is providing power to the switch. • Blinking yellow: The redundant power supply unit is present, but the power has failed. • Off: The redundant power supply is disconnected or not present. Fan • Red: Fan has failed. • Off: Fan operating normally. PWR (power) • Solid green: Power is supplied and the switch is working. • Solid yellow: Power-on Self-Test (POST) is in progress. • Blinking yellow: POST, CPU, or internal power supply has failed. • Off: Power is disconnected. 2-2 Introduction v1.0, February 2007