Netgear GSM7352SNA GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 19

Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Table 2-3. LED Descriptions for GSM7328FS (continued) LED 4-10GbE interface Module One LED /module RPS LED Description XFP Module Present or Stacking Adapter Present & ACT LED : XFP Module Present LED /ACT: • Off: 10GbE adapter absent • Solid Green: 10GbE adapter present • Blinking Green: Packet transmission or reception is occurring on the port Stacking Adapter Link/ACT LED • OFF: Stacking module absent • Solid Green: Stacking module present • Blinking Green: Packets transmission or reception is occurring on the port • Solid Green: NETGEAR RPS Bank connected (Using internal Power) • Solid Yellow: The Switch internal power has failed or been disconnected , but the RPS is providing power to switch • Blinking Yellow: RPS unit is present but the power has failed. • Off: NETGEAR RPS Bank Disconnected. GSM7328FS Rear Panel The rear panel has two module bays, a console port, redundant power supply connector, and a standard AC power receptacle for the supplied power cord. The module bays support any combination of either the ProSafe 10-Gigabit Ethernet XFP Adapter (AX741) or the ProSafe 24-Gigabit Stackable Module (AX742). Power receptacle Figure 2-6 Stacking/XFP module bays Introduction Redundant power supply connector v1.0, February 2007 Console 2-9