Netgear PS113 PS113 Reference Manual - Page 160
Table C-1., guration Settings continued
View all Netgear PS113 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server Table C-1. Configuration Settings (continued) Parameter and Command Subnet Mask (4002 MASK) TCP Session Retry Interval (4010 TCP_INT) Retry Count (4011 TCP_CNT) L1 Logical Printer Mapping (0100 L1_PROUT) Definition If the Gateway Address is 0.0.0.0, leave the Subnet Mask at 0.0.0.0. If you have a router, enter the Subnet mask for the segment to which the print server is attached. Sets how long the print server should wait before retrying a TCP/IP connection that is lost. Allowable values are from 0 to 255 seconds, with 2 as the default. Sets how many attempts for reconnection will be made. After attempting the set number, the TCP/IP session is terminated. Allowable values are from 0 to 255, with 254 as the default. The physical port that this L1 logical printer maps to. String Before Job for L1 Logical Printer (0101 L1_PREST) String After Job (0102 L1_POSTR) Convert LF to CR+LF (0103 L1_CHGLF) The L1 logical printer control string (in hex) to be sent to the printer before each print job. Note: A printer control string is limited to 15 characters. Examples are: • ASCII = [Esc]&l0O Hexadecimal = 1B266C304F • ASCII = [Esc]&l1O Hexadecimal = 1B266C314F The L1 logical printer control string (in hex) to be sent to the printer after each print job. Note: A printer control string is limited to 15 characters. Examples are: • ASCII = [Esc]&l0O Hexadecimal = 1B266C304F • ASCII = [Esc]&l1O Hexadecimal = 1B266C314F If On, LF (line feed) characters are changed to CR+LF (carriage return + line feed). If off, no conversion is done. C-2 CONFIG File