Netgear PS113 PS113 Reference Manual - Page 24

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server Table 1-1. LED Descriptions (continued) Label Color Activity Description NETWORK (Model PS110 and PS113) • Link Green On The link between the port and the network is good. • 100M Green On The link between the port and the network is a half-duplex 100 Mbps connection. Off The link between the port and the network is a half-duplex 10 Mbps connection. • Tx Green Blinking The print server is sending data out of the port. • Rx Green Blinking The print server is receiving data on the port. • Col (collision) Amber Blinking Data collision is occurring on the network. Note that occasional collisions are normal. Rear Panel The rear panel of the Model PS104 Print Server and the Model PS105 Print Server has one parallel PRINTER port, the rear panel of the Model PS110 Print Server has two parallel ports for printers (PRINTER 1 and PRINTER 2), and the rear panel of the Model PS113 Print Server has three parallel ports for printers (PRINTER 1, PRINTER 2, and PRINTER 3). The ports on the first two print servers accept either a printer or another parallel device such as a plotter. The ports on the second two print servers accept two or three ports, therefore, two or three parallel devices can be connected and can operate simultaneously. The Model PS104 Print Server has four 10BASE-T network ports. The Model PS105 Print Server has four 10BASE-T network ports and one BNC network port. The Model PS110 and Model PS113 Print Server each has one 10/100BASE-T network port. The 10/100BASE-T port is an autonegotiation port that operates in 100 Mbps and in half-duplex mode when connected to a Fast Ethernet network. Introduction 1-5