Netgear PS113 PS113 Reference Manual - Page 167
Appendix E IP Setup, Overview
View all Netgear PS113 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Appendix E IP Setup This appendix provides a brief overview of IP addressing. Overview This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or assigned a wrong subnet IP address. Refer to Table E-1 to assign a static IP address. Table E-1 describes each setting. Table E-1. IP Configuration Settings Setting Device Name Device IP Address Gateway IP Address Subnet Mask Recommended Value Shown on a sticker on the base of the device in the form "PSxxxxxx." 192.168.0.1 0.0.0.0 0.0.0.0. Clicking on Reset will set all values back to zero, and clicking on OK sets the data entered. Ensure that the IP address assigned to the device is not already in use. IP Setup E-1
IP Setup
E-1
Appendix E
IP Setup
This appendix provides a brief overview of IP addressing.
Overview
This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or
assigned a wrong subnet IP address. Refer to
T
able
E-
1
to assign a static IP address.
T
able
E-
1
describes each setting.
Clicking on Reset will set all values back to zero, and clicking on OK sets the data entered.
Ensure that the IP address assigned to the device is not already in use.
Table E-1.
IP Con
fi
guration Settings
Setting
Recommended Value
Device Name
Shown on a sticker on the base of the device in the form
"PSxxxxxx."
Device IP Address
192.168.0.1
Gateway IP Address
0.0.0.0
Subnet Mask
0.0.0.0.