Netgear PS113 PS113 Reference Manual - Page 58
Microsoft Windows NT and Windows 2000 Printing, FirstGear for Print Server
View all Netgear PS113 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 4 Microsoft Windows NT and Windows 2000 Printing This chapter describes how to configure and use the NETGEAR Model PS104/PS105/PS110/ PS113 print server in a Microsoft Windows NT and Windows 2000 networking environment. To correctly configure your hardware and software for the Microsoft Windows platform, you must: • Install FirstGear for Print Server software. • Run Setup • Configure the user PC to print to the NETGEAR print server. FirstGear for Print Server This section describes how to install and set up the print server with the FirstGear for Print Server Program in Windows NT. There are several options to choose from: • User Installation-used through the NetBEUI protocol, this option is geared toward the user who is already connected to the LAN and needs to set up a PC to the NETGEAR print server. • Admin Installation-this option is geared toward the user who is connected to the LAN and also manages the print server. • User Installation with diskette-this option generates an installation floppy disk for the user without a CD-ROM drive. To install and set up your network and your print server for the NETGEAR print server, you must be using a PC with Windows NT 3.51 and later operating system and with either the TCP/IP protocol or the NetBEUI protocol enabled. Microsoft Windows NT and Windows 2000 Printing 4-1