Netgear SB104 Installation Guide - Page 6
Connect the Network Cables - hub
UPC - 606449000825
View all Netgear SB104 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connect the Network Cables Using the unshielded twisted pair (UTP) cables that are supplied, connect any port on the hub to the port on a network card in each PC. Note: Set the Normal/Uplink push button on the Model EN104TP hub to Normal when connecting port 4 on the hub to either a PC or the network card. PC with network Power adapter PC with network card installed card installed Printer (optional) Hub RJ-45 connector Category 5 10/100 Mbps UTP cables* RJ-45 connector *Use the cables provided or any Category 5 UTP cable. Maximum length = 100 meters (300 feet) 7995FB Model SB104 10 Mbps Network Starter Kit Installation Guide Downloaded from www.Manualslib.com manuals search engine
Model SB104 10 Mbps Network Starter Kit Installation Guide
Using the unshielded twisted pair (UTP) cables that are supplied, connect any
port on the hub to the port on a network card in each PC.
Note:
Set the Normal/Uplink push button on the Model EN104
TP
hub
to Normal when connecting port 4 on the hub to either a PC or the
network card.
Connect the Network Cables
Power adapter
PC with network
card installed
Category 5 10/100 Mbps UTP cables*
*Use the cables provided or any Category 5 UTP cable.
Maximum length = 100 meters (300 feet)
PC with network
card installed
Printer
(optional)
RJ-45
connector
RJ-45
connector
Hub
7995FB
Downloaded from
www.Manualslib.com
manuals search engine