Netgear WAC730 Reference Manual - Page 17
Configuration > System > Basic > General
View all Netgear WAC730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730 To configure basic system settings: 1. Select Configuration > System > Basic > General. 2. Configure the settings as explained in the following table: Setting Description Access Point Name This unique name is the wireless access point NetBIOS name. The name is printed on the rear label of the wireless access point. The default is netgearxxxxxx, in which xxxxxx represents the last 6 digits of the wireless access point MAC address. You can replace the default name with a unique name up to 15 characters long. The access point name can be retrieved through SNMP. Country / Region From the Country / Region menu, select the country where the wireless access point is installed. Note: It might not be legal to operate this wireless access point in a region other than one of those identified in this field. 3. Click the Apply button. Your settings are saved. To configure time settings: 1. Select Configuration > System > Basic > Time. Initial Setup 17