Netgear WG111T WG111T User Manual - Page 30

NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual Setting up a Profile to Connect to an Access Point or Router Follow these instructions to set up the WG111 108 Mbps Wireless USB 2.0 Adapter to connect to a wireless access point or router. 1. Use the icon to open the Smart Wizard. The Settings page opens. Figure 2-4 2. Enter the network settings. a. In the Network Type section, be sure that Access Point (Infrastructure) is selected. b. In the Profile box, type the name of the profile. c. In the Network Name (SSID) field select a network or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly the SSID used by the access point. 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply and then click Close to exit the wizard, or Cancel to return to the previous settings. 2-6 v2.0, February 2007