Netgear WG111T WG111T User Manual - Page 38
Setting up WPA-PSK Security - wpa2
View all Netgear WG111T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual 2. Configure the Security settings. Figure 2-10 a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WPA2-PSK [AES]. For more information about WPA2-PSK security, see the Web link to "Wireless Communications" in Appendix B. 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply and then click Close to exit the Smart Wizard. Setting up WPA-PSK Security Follow the steps below to configure WPA-PSK Security. 1. Run the WG111T Smart Wizard. 2-14 v2.0, February 2007