Netgear WG302 WG302v1 Reference Manual - Page 29
How to Log In to the WG302 Using Its Default IP Address
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Reference Manual for the WG302 802.11g ProSafe Wireless Access Point How to Log In to the WG302 Using Its Default IP Address 1. 192.168.0.228 is the default IP address of your access point. However, the WG302 is also set, by default, to be a DHCP client. So, if the WG302 has not yet been installed, and there is no DHCP server on the network, you can log in to the WG302 using its default IP address. You should use either the NetBIOS name printed on the bottom label to log in. Note: The computer you are using to connect to the WG302 should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0. 2. Open a Web browser such as Internet Explorer or Netscape Navigator. 3. Connect to the WG302 by entering its default address of http://192.168.0.228 into your browser. 4. A login window like the one shown below opens: Figure 3-3: Login window Log in use the default user name of admin and default password of password. Once you have entered your access point name, your Web browser should automatically find the WG302 Access Point and display the home page, as shown in "Login result: WG302 home page" on page 3-6. Basic Installation and Configuration 3-8 December 2003