Netgear WG302 WG302v1 Reference Manual - Page 38
Using the Basic IP Settings Options, Access Point Name NetBIOS, The IP Address
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Reference Manual for the WG302 802.11g ProSafe Wireless Access Point Using the Basic IP Settings Options The Basic IP Settings menu is under the Basic heading of the main menu. Use this menu to configure DHCP, static IP, and access point NetBIOS name settings. Figure 3-7: IP Settings menu • Access Point Name (NetBIOS) Enter a new name for the wireless access point and click Apply to save your changes. • The IP Address The wireless access point is shipped preconfigured to use a private IP address on the LAN side, and to act as a DHCP client. If the wireless access point does not find a DHCP server on the Ethernet LAN, it defaults to this IP configuration: - IP Address- 192.168.0.228 - IP Subnet Mask- 255.255.255.0 - Gateway - 0.0.0.0 If your network has a requirement to use a different IP addressing scheme, you can make those changes in this menu. These settings are only required if the "Use this IP address" radio button is chosen. Remember to click Apply to save your changes. 3-17 December 2003 Basic Installation and Configuration