Netgear WG302 WG302v1 Reference Manual - Page 40
CLI Commands, Press the return key, and the screen below should appear., admin, password - default login
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Reference Manual for the WG302 802.11g ProSafe Wireless Access Point 3. Press the return key, and the screen below should appear. Figure 4-1: Secure Telnet Client The login name is admin and password is the default password. After successful login, the screen should show the (NetBIOS Name)> prompt In this example the prompt is (netgear74F35E) >. Enter help to display the CLI command help.. CLI Commands The CLI commands are listed in the following table. Table 4-1. CLI Commands Command get association get authentication get BeaconInterval get channel get channels get CountryCode get DTIM get encryption get FragmentationThreshold get key get KeyDefault Function Display Associated station list Display Authentication Type Display Beacon period in TU(1024 us) Display Refer to the result of "get channels" Display Valid channels for current Country/Region Display Country and Region Display DTIM Period in Beacon Interval Display Data Encryption Display Fragmentation Threshold (even only) Display Key table maintenance Display Default WEP Key ID 4-2 Management December 2003