Netgear WNDAP330 Bridging and Repeating Guide - Page 4
Wireless Bridinging and, Repeating, Repeater. - wireless bridge
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Access Point 1 Access Point 2 Access Point 3 • In each Access Point, in the ❶ Wireless Bridge Page, enable Wireless Bridinging and Repeating and select the option for Repeater. • Note that two profiles will be enabled used in Access Point 2. As it is in the ➋ middle, it must connect to both Access Point 1 and Access Point 3. • Make note of the following: ➌ ❶ MAC Adress of Access Point 1 = ➋ MAC Adress of Access Point 2 = ➌ MAC Adress of Access Point 3 =
Access Point 1
•
In each Access Point, in the
Wireless Bridge Page, enable
Wireless Bridinging and
Repeating
and select the option for
Repeater.
Access Point 2
•
Note that two profiles will be enabled
used in Access Point 2. As it is in the
middle, it must connect to both
Access Point 1 and Access Point 3.
Access Point 3
•
Make note of the following:
MAC Adress of Access Point 1 =
MAC Adress of Access Point 2 =
MAC Adress of Access Point 3 =