Nikon COOLPIX S810c Product Manual - Page 259
Assign non-CPU lens number selection to a camera, control.
View all Nikon COOLPIX S810c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
To recall lens data when using a non-CPU lens: 1 Assign non-CPU lens number selection to a camera control. Select Choose non-CPU lens number as the "Press + command dials" option for a camera control in the Custom Settings menu (0 341). Non-CPU lens number selection can be assigned to the Fn button (Custom Setting f3, Assign Fn button, 0 337), the Pv button (Custom Setting f4, Assign preview button, 0 342), or the center of the sub-selector (Custom Setting f6, Assign sub-selector center, 0 342). 2 Use the selected control to choose a lens number. Press the selected control and rotate the main or subcommand dial until the desired lens number is displayed in the top control panel. Focal length Maximum aperture Main command dial Lens number A Focal Length Not Listed If the correct focal length is not listed, choose the closest value greater than the actual focal length of the lens. t A Teleconverters and Zoom Lenses The maximum aperture for teleconverters is the combined maximum aperture of the teleconverter and the lens. Note that lens data are not adjusted when non-CPU lenses are zoomed in or out. The data for different focal lengths can be entered as separate lens numbers, or the data for the lens can be edited to reflect the new values for lens focal length and maximum aperture each time zoom is adjusted. 237