Nikon COOLPIX S810c Product Manual - Page 446
Replacing the Clock Battery
View all Nikon COOLPIX S810c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 446 highlights
Replacing the Clock Battery The camera clock is powered by a CR1616 lithium battery with a life of about two years. If the B icon is displayed in the top control panel while the standby timer is on, the battery is running low and needs to be replaced. When the battery is exhausted, the B icon will flash while the standby timer is on. Photographs can still be taken but will not be stamped with the correct time and date. Replace the battery as described below. 1 Remove the main battery. The clock battery chamber is located on the roof of the main battery chamber. Turn the camera off and remove the EN-EL18a battery. 2 Open the clock battery chamber. Slide the clock battery chamber cover toward the front of the main battery chamber. 3 Remove the clock battery. 4 Insert the replacement battery. Insert a new CR1616 lithium battery so that the positive side (the side marked with "+" and the battery name) is visible. n 424