Nikon COOLPIX S810c Product Manual - Page 360

Option Description If the flash is currently off, front-curtain sync will be h IDisable/ enable selected while the Fn button is pressed. If the flash is currently enabled, it will instead be disabled while the Fn button is pressed. If the Fn button is pressed while exposure, flash, or ADL bracketing is active in single frame or quiet shutter-release mode, all shots in the current 1 Bracketing burst bracketing program will be taken each time the shutter-release button is pressed. If white balance bracketing is active or continuous release mode (mode CH or CL) is selected, the camera will repeat the bracketing burst while the shutter-release button is held down. If image quality is set to JPEG fine, JPEG normal, or JPEG basic, "RAW" will be displayed in the rear control panel and an NEF (RAW) copy will be recorded with the next picture taken after the Fn button is pressed (the original image quality setting will be 4 + NEF (RAW) restored when you remove your finger from the shutter-release button). NEF (RAW) copies are recorded at the settings currently selected for NEF (RAW) recording in the shooting menu (0 304). To exit without recording an NEF (RAW) copy, press the Fn button again. L Matrix metering Matrix metering is activated while the Fn button is pressed. Center- M weighted metering Center-weighted metering is activated while the Fn button is pressed. N Spot metering Spot metering is activated while the Fn button is pressed. b Viewfinder grid display Press the Fn button to turn the framing grid display in the viewfinder on or off (0 10). ! Viewfinder virtual horizon Press the Fn button to view a virtual horizon display in the viewfinder (0 340). U 338